Optimasi Parametrik Minyak Pirolisis dan Karbon Sisa Hasil Pirolisis Ban Bekas dalam Reaktor Atmosfer Inert.

Lukas Kano Mangalla; Agustinus Lolok; Samhuddin Samhuddin; La Ode Ahmad Barata

doi:10.55679/pistonjt.v10i2.129

Penulis

Lukas Kano Mangalla Jurusan Teknik Mesin, Universitas Halu Oleo
Agustinus Lolok Jurusan Teknik Elektro, Universitas Halu Oleo
Samhuddin Samhuddin Jurusan Teknik Mesin, Universitas Halu Oleo
La Ode Ahmad Barata Jurusan Teknik Mesin, Universitas Halu Oleo

DOI:

https://doi.org/10.55679/pistonjt.v10i2.129

Kata Kunci:

Pirolisis ban bekas, Optimasi parameter, Minyak pirolsis, Atmosfer inert, Bahan bakar alternatif.

Abstrak

Waste tires represent a significant environmental challenge that requires sustainable solutions through conversion into energy. This study aims to optimize the process parameters for the pyrolysis of waste tires in an inert atmosphere reactor to maximize the yield and quality of liquid and solid products. Experiments were conducted by varying temperature (400, 450, 500°C) and residence time (10, 15, 20 minutes) using controlled cubic-shaped tire samples. The results indicate that the optimal operating conditions were achieved at 450°C and 15 minutes, producing a pyrolysis oil yield of 48.3% with a high calorific value of 44.6 MJ/kg, along with a solid char yield of 35.2%. Further analysis revealed significant energy conversion efficiency of the process. These findings provide a strong technical foundation for developing commercial-scale pyrolysis technology that effectively manages tire waste while producing quality alternative fuels

Unduhan

Data unduhan belum tersedia.

Referensi

WBCSD, “Global Tire Waste Management Report 2023. Geneva: World Business Council for Sustainable Development.” 2023.

T. Iskandar and A. C. K. Fitri, “Asap Cair dan Biochar hasil Proses Pyrolisis Sekam Padi dan Biomassa lainnya sebagai Income Generating Unit di Universitas Tribhuwana Tunggadewi,” JAST J. Apl. Sains dan Teknol., vol. 2, no. 2, pp. 81–87, 2018.

B. Tian, J. Wang, Y. Qiao, H. Huang, L. Xu, and Y. Tian, “Understanding the pyrolysis synergy of biomass and coal blends based on volatile release, kinetics and char structure,” Biomass and Bioenergy, vol. 168, p. 106687, Jan. 2023, doi: 10.1016/J.BIOMBIOE.2022.106687.

X. Li et al., “A Study on the Pyrolysis Behavior and Product Evolution of,” Catalysts, vol. 14, no. 200, pp. 1–20, 2024.

KLHK, “Statistik Pengelolaan Limbah Bahan Berbahaya dan Beracun 2022. Jakarta,Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia.” 2023.

B. Skariah and R. C. Gupta, “A comprehensive review on the applications of waste tire rubber in cement concrete,” Renew. Sustain. Energy Rev., vol. 54, pp. 1323–1333, 2016, doi: 10.1016/j.rser.2015.10.092.

M. Hashamfirooz and M. Hadi, “Heliyon A systematic review of the environmental and health effects of waste tires recycling,” Heliyon, vol. 11, no. 2, p. e41909, 2025, doi: 10.1016/j.heliyon.2025.e41909.

J. Pendidikan, M. Sains, and M. Pirolisis, “Perbandingan kualitas bahan bakar dari pengolahan sampah plastik menjadi bahan bakar minyak dengan metode pirolisis,” EduMatSains, vol. 6, no. 1, pp. 219–230, 2021.

R. T. Aziz et al., “BAHAN PRODUKSI GAS ASAP CAIR MELALUI METODE PIROLISIS,” vol. 5, no. 1, pp. 73–82, 2022.

J. P. Simanjuntak, R. Siahaan, and A. N. Putra, Teknologi Pirolisiis Biomassa-Energi Terbarukan. 2024.

Z. Cepic, V. Mihajlovic, S. Duric, M. Milotic, M. S. STepanov, and M. I. Micunovic, “Experimental Analysis of Temperature Influence on Waste Tire Pyrolysis,” Energies, vol. 14, no. 5403, 2021, doi: https://doi.org/10.3390/en14175403 1.

M. Pahnila, A. Koskela, P. Sulasalmi, and T. Fabritius, “A Review of Pyrolysis Technologies and the Effect of Process Parameters on Biocarbon Properties,” Energies, vol. 16, no. 6936, pp. 1–27, 2023.

K. Kumar and N. . Panwar, “Pyrolysis technologies for biochar production in waste management : a review,” Clean Energy, vol. 8, no. 4, pp. 61–78, 2024.

W. H. Chen, Naveen C, P. K. Ghodke, A. K. Sharma, and P. Bobde, “Co-pyrolysis of lignocellulosic biomass with other carbonaceous materials: A review on advance technologies, synergistic effect, and future prospectus,” Fuel, vol. 345, p. 128177, Aug. 2023, doi: 10.1016/J.FUEL.2023.128177.

R. Cherba, K. Wróblewski, and E. Molga, “PYROLYSIS OF WASTE TYRES – THE EFFECT OF REACTION,” Chem. Process Eng., vol. 38, no. 3, pp. 363–377, 2017, doi: 10.1515/cpe-2017-0028.