RANCANG BANGUN MESIN PENGGILING DAGING MENGGUNAKAN TENAGA PENGGERAK MOTOR LISTRIK

Rivaldy; La Ode Ahmad Barata; Salimin

doi:10.55679/pistonjt.v10i2.112

Penulis

Rivaldy Prgram Studi D-3 Teknik Mesin Universitas Halu Oleo
La Ode Ahmad Barata Jurusan Teknik Mesin, Universitas Halu Oleo
Salimin Pendidikan Vokasi Jurusan Teknik Mesin, Universitas Halu Oleo

DOI:

https://doi.org/10.55679/pistonjt.v10i2.112

Kata Kunci:

Mesin Penggiling, Daging,, Motor Listrik, 2900 rpm

Abstrak

The meat grinder machine functions to mincemeat so that it can be easily mixed with other food ingredients. This study aims to design an electric motor–based meat grinder and to determine the performance of the designed machine. The research method includes literature study, observation, planning, design, and fabrication. The machine is designed using a single-phase electric motor with a power of 0.3 HP, a speed of 2900 rpm, a pulley ratio of 1:3, and a voltage of 220 volts as the power source. The transmission system used is a single transmission consisting of a pair of pulleys with diameters of 8 inches on the motor and 22 inches on the grinder shaft. The test results show that the machine operates at 1000 rpm without load and 995 rpm when grinding meat. The vibration values recorded were 0.25 cm/s on the motor and 0.33 cm/s on the frame, which, according to ISO 10816 standards, fall into Zone A—indicating a safe vibration level for operation. The machine can grind meat at an average rate of 0.033 kg/s or approximately 2 kg/min. The system uses a single transmission consisting of a pair of pulleys connected by a V-belt to transmit and reduce rotational speed. When the motor is turned on, its rotation is transmitted to pulley 1, then to pulley 2 via the V-belt, causing pulley 2 to rotate. The connected shaft, screw conveyor, and cutting blade rotate together because they are mounted on the same shaft.

Unduhan

Data unduhan belum tersedia.

Referensi

Manalu, P., Tambunan, A., & Siahaan, E., RANCANG BANGUN MESIN PENGGILING DAGING KAPASITAS 8 KG/JAM, Jurnal Teknologi Mesin UDA, 3(2), pp. 245 – 256, 2022

Ahmad Syahrizal Hamdani, Zetyawan Ardan, Muh. Maftuh, and Krismon La Maru, “Perancangan Mesin Penggiling Jagung untuk Pakan Ternak”, Piston-JT, vol. 8, no. 2, pp. 06–13, Dec. 2023.

11–18, May 2013.

Herlambang, Analisis Alat Peggiling Daging Konsumsi dengan penggerak motor Listrik AC Kapasitas 6 kg/jam, Tugas Akhir, Fakultas Teknik, Universitas Krisnadwipayana, Jakarta, 2021.

Porawati dan Kurniawan, “Mesin Penggiling Daging (Meat Grinder) Kapasitas 8 KG Menggunakan Motor Listrik”, Inovator, Vol. 1. No.2, pp. 1- 2, 2018

Napitupulu, R. K., Purba, J. S., & Naibaho, W., “Analisa Variasi Saringan Mesin Penggiling Daging Ayam M. Sinaga, dan A.Z. Hayda, “Analisa Perancangan dan BEP Ekonomis Mesin Penggiling Daging berbahan Poros S50C dengan Daya Motor 0,5 HP”, Journal Kajian Teknik Mesin, Vol.8 (1), pp. 64- 72, 2023.

Purnama and B. Achmadi Hasyim, “Perakitan Mesin Penggiling Daging”, J. Rekayasa Mesin, vol. 1, no. 01, pp. Kapasitas 1 Kg Terhadap Waktu”, Jurnal Teknik Mesin, 15(2), pp. 109 – 114, 2022. https://doi.org/10.30630/jtm.15.2.958

M.R.S. Ardiansyah, “Perencanaan Mesin Penggiling Daging dengan Kapasitas 5 kg”, Tugas Akhir Sarjana, Program Studi Teknik Mesin, Universitas Gresik, 2022.