Hasil Pencarian

• %2025-%07-%01 pp. 48 - 53

  Analisis Perbandingan Kinerja Injektor Mesin Wartsila W20V34DF pada Beban 0 kW dan 3000 kW Menggunakan Simulasi CFD

  Budi Sutrisno, Dedy Ashari, La Ode Ichlas Syahrullah Yunus, La Ode Abdul Gamsir, Akhmad Fadli Ibrahim, Yuvita Satriani Djuli

  doi 10.55679/pistonjt.v10i1.96

  Views 72

  Abstract References PDF

  Referensi

  Analisis Perbandingan Kinerja Injektor Mesin Wartsila W20V34DF pada Beban 0 kW dan 3000 kW Menggunakan Simulasi CFD

  1. J. Smith and A. Johnson, "Impact of fuel injector spray characteristics on combustion efficiency in large bore marine engines," Journal of Marine Engineering & Technology, vol. 19, no. 3, pp. 187-195, (2024).
  2. L. Chen and H. Wang, "Numerical investigation of fuel spray and combustion in a direct injection engine using CFD," Applied Energy, vol. 301, p. 117432, (2023).
  3. M. P. Kumar and S. R. Reddy, "Analysis of diesel engine injector nozzle wear and its effect on engine performance and emissions,"International Journal of Engine Research, vol. 23, no. 1, pp. 132-145, (2022).
  4. R. Sharma and V. Gupta, "Computational fluid dynamics analysis of fuel injection and mixing in internal combustion engines: A review,"Energy Reports, vol. 7, pp. 110-125, (2021).
  5. Y. Zhang, L. Wang, and X. Liu, "Injector performance and emission characteristics," Energy Reports, vol. 6, pp. 123-130, (2020).
  6. K. Li, P. Li, and J. Liu, "CFD simulation of fuel spray and combustion in a common rail diesel engine," Combustion and Flame, vol. 205, pp. 1-12, (2023).
  7. Tegar Armanto., Analisis Computational Fluid Dynamics (CFD) Sistem Pemanasan Dan Pendinginan Bioreaktor Fermentasi Kopi (2024).
  8. Saputra, A. Simulasi Aliran Fluida Dengan Variasi Penempatan Injektor Pada Intake Manifold Mesin 2 Langkah Menggunakan Cfd (Doctoral Dissertation, Universitas Negeri Jakarta) (2024).

  Close
• %2025-%12-%30 pp. 103 - 112

  Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

  M Faizur Rijal Azhad, Parman, Immanuel Fredy Augustino, Rahmat Basya Shahrys Tsany, Dicki Nizar Zulfika

  doi 10.55679/pistonjt.v10i2.118

  Views 99

  Abstract References PDF

  Referensi

  Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

  1. H. I. Kim, J. Shon, and K. Lee, “A study of fuel economy and exhaust emission according to engine coolant and oil temperature,” Journal of Thermal Science and Technology, vol. 8, no. 1, pp. 255–268, 2013, doi: 10.1299/jtst.8.255.
  2. K. Holmberg and A. Erdemir, “Influence of tribology on global energy consumption, costs and emissions,” Sep. 01, 2017, Tsinghua University Press. doi: 10.1007/s40544-017-0183-5.
  3. K. Holmberg and A. Erdemir, “The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars,” Tribol Int, vol. 135, pp. 389–396, Jul. 2019, doi: 10.1016/j.triboint.2019.03.024.
  4. J. Luo and X. Zhou, “Superlubricitive engineering—Future industry nearly getting rid of wear and frictional energy consumption,” Aug. 01, 2020, Tsinghua University Press. doi: 10.1007/s40544-020-0393-0.
  5. G. Vaitkunaite, C. Espejo, B. Thiebaut, A. Neville, and A. Morina, “Low friction tribofilm formation and distribution on an engine cylinder tested with MoDTC-containing low viscosity engine lubricants,” Tribol Int, vol. 171, p. 107551, Jul. 2022, doi: 10.1016/j.triboint.2022.107551.
  6. L. Guan, X. L. Feng, G. Xiong, and J. A. Xie, “Application of dielectric spectroscopy for engine lubricating oil degradation monitoring,” Sens Actuators A Phys, vol. 168, no. 1, pp. 22–29, Jul. 2011, doi: 10.1016/j.sna.2011.03.033.
  7. Theo. Mang and Wilfried. Dresel, Lubricants and lubrication. Wiley-VCH, 2007.
  8. M. S. Charoo and M. F. Wani, “Tribology in Industry Tribological Properties of IF-MoS 2 Nanoparticles as Lubricant Additive on Cylinder Liner and Piston Ring Tribo-pair,” 2016. [Online]. Available: www.tribology.fink.rs
  9. W. Ahmed Abdalglil Mustafa, F. Dassenoy, M. Sarno, and A. Senatore, “A review on potentials and challenges of nanolubricants as promising lubricants for electric vehicles,” Lubrication Science, vol. 34, no. 1, pp. 1–29, Jan. 2022, doi: 10.1002/ls.1568.
  10. A. Devaraj, M. Nagappan, D. Yogaraj, O. Prakash, Y. A. Rao, and A. Sharma, “Influence of nano-additives on engine behaviour using diesel-biodiesel blend,” Mater Today Proc, Apr. 2022, doi: 10.1016/j.matpr.2022.03.598.
  11. J. Zhao, Y. Huang, Y. He, and Y. Shi, “Nanolubricant additives: A review,” Oct. 01, 2021, Tsinghua University. doi: 10.1007/s40544-020-0450-8.
  12. P. Gangwani, M. K. Gupta, and J. Bijwe, “Synergism between particles of PTFE and hBN to enhance the performance of oils,” Wear, vol. 384–385, pp. 169–177, 2017, doi: 10.1016/j.wear.2017.01.053.
  13. A. v. Bondarev, A. Fraile, T. Polcar, and D. v. Shtansky, “Mechanisms of friction and wear reduction by h-BN nanosheet and spherical W nanoparticle additives to base oil: Experimental study and molecular dynamics simulation,” Tribol Int, vol. 151, Nov. 2020, doi: 10.1016/j.triboint.2020.106493.
  14. M. I. H. C. Abdullah, M. F. bin Abdollah, H. Amiruddin, N. Tamaldin, and N. R. M. Nuri, “Optimization of tribological performance of hBN/AL2O3 nanoparticles as engine oil additives,” in Procedia Engineering, Elsevier Ltd, 2013, pp. 313–319. doi: 10.1016/j.proeng.2013.12.185.
  15. S. Shahnazar, S. Bagheri, and S. B. Abd Hamid, “Enhancing lubricant properties by nanoparticle additives,” Jan. 30, 2016, Elsevier Ltd. doi: 10.1016/j.ijhydene.2015.12.040.
  16. A. Kotia, K. Chowdary, I. Srivastava, S. K. Ghosh, and M. K. A. Ali, “Carbon nanomaterials as friction modifiers in automotive engines: Recent progress and perspectives,” Jul. 15, 2020, Elsevier B.V. doi: 10.1016/j.molliq.2020.113200.
  17. A. Tomala et al., “Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions,” Tribol Int, vol. 129, pp. 137–150, Jan. 2019, doi: 10.1016/j.triboint.2018.08.005.
  18. S. Shahnazar, S. Bagheri, and S. B. Abd Hamid, “Enhancing lubricant properties by nanoparticle additives,” Int J Hydrogen Energy, vol. 41, no. 4, pp. 3153–3170, Jan. 2016, doi: 10.1016/j.ijhydene.2015.12.040.
  19. W. Dai, B. Kheireddin, H. Gao, and H. Liang, “Roles of nanoparticles in oil lubrication,” Tribol Int, vol. 102, pp. 88–98, Oct. 2016, doi: 10.1016/j.triboint.2016.05.020.
  20. O. Tevet, P. Von-Huth, R. Popovitz-Biro, R. Rosentsveig, H. D. Wagner, and R. Tenne, “Friction mechanism of individual multilayered nanoparticles,” Proceedings of the National Academy of Sciences, vol. 108, no. 50, pp. 19901–19906, Dec. 2011, doi: 10.1073/pnas.1106553108.
  21. M. Kalin, J. Kogovšek, and M. Remškar, “Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives,” Wear, vol. 280–281, pp. 36–45, Mar. 2012, doi: 10.1016/j.wear.2012.01.011.
  22. C. Kumara, D. N. Leonard, H. M. Meyer, H. Luo, B. L. Armstrong, and J. Qu, “Palladium Nanoparticle-Enabled Ultrathick Tribofilm with Unique Composition,” ACS Appl Mater Interfaces, vol. 10, no. 37, pp. 31804–31812, Sep. 2018, doi: 10.1021/acsami.8b11213.
  23. S. Zhang, L. Hu, D. Feng, and H. Wang, “Anti-wear and friction-reduction mechanism of Sn and Fe nanoparticles as additives of multialkylated cyclopentanes under vacuum condition,” Vacuum, vol. 87, pp. 75–80, Jan. 2013, doi: 10.1016/j.vacuum.2012.07.009.
  24. J. Padgurskas, R. Rukuiza, I. Prosyčevas, and R. Kreivaitis, “Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles,” Tribol Int, vol. 60, pp. 224–232, Apr. 2013, doi: 10.1016/j.triboint.2012.10.024.
  25. J. M. Liñeira del Río, E. R. López, and J. Fernández, “Synergy between boron nitride or graphene nanoplatelets and tri(butyl)ethylphosphonium diethylphosphate ionic liquid as lubricant additives of triisotridecyltrimellitate oil,” J Mol Liq, vol. 301, p. 112442, Mar. 2020, doi: 10.1016/j.molliq.2020.112442.
  26. J. M. Liñeira del Río, E. R. López, and J. Fernández, “Tribological properties of graphene nanoplatelets or boron nitride nanoparticles as additives of a polyalphaolefin base oil,” J Mol Liq, vol. 333, Jul. 2021, doi: 10.1016/j.molliq.2021.115911.
  27. O. N. Çelik, N. Ay, and Y. Göncü, “Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel,” Particulate Science and Technology, vol. 31, no. 5, pp. 501–506, Sep. 2013, doi: 10.1080/02726351.2013.779336.
  28. Y. Wang, Z. Wan, L. Lu, Z. Zhang, and Y. Tang, “Friction and wear mechanisms of castor oil with addition of hexagonal boron nitride nanoparticles,” Tribol Int, vol. 124, pp. 10–22, Aug. 2018, doi: 10.1016/j.triboint.2018.03.035.
  29. H. Baş and Y. E. Karabacak, “Investigation of the Effects of Boron Additives on the Performance of Engine Oil,” Tribology Transactions, vol. 57, no. 4, pp. 740–748, Jul. 2014, doi: 10.1080/10402004.2014.909549.
  30. T. Akbiyik, N. Kahraman, and T. Taner, “Investigation of the effect of boron additive to lubricating oil on engine performance, exhaust, and emissions,” Fuel, vol. 312, Mar. 2022, doi: 10.1016/j.fuel.2021.122931.
  31. M. Ilman Hakimi Chua Abdullah, M. Fadzli Bin Abdollah, H. Amiruddin, N. Tamaldin, N. Rashid Mat Nuri, and A. Rafeq Saleman, “The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine,” Journal of Mechanical Engineering, vol. 1, no. 1, pp. 103–112, 2017.
  32. N. Thachnatharen, M. Khalid, A. Arulraj, and N. Sridewi, “Tribological performance of hexagonal boron nitride (hBN) as nano-additives in military grade diesel engine oil,” in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 70–73. doi: 10.1016/j.matpr.2021.04.145.
  33. N. Nomède-Martyr, M. Vitulin, H. Joseph, and P. Thomas, “Moringa oil with graphite and hexagonal boron nitride particles as additives for lubrication,” Diam Relat Mater, vol. 124, Apr. 2022, doi: 10.1016/j.diamond.2022.108930.
  34. Q. Wan, Y. Jin, P. Sun, and Y. Ding, “Tribological behaviour of a lubricant oil containing boron nitride nanoparticles,” in Procedia Engineering, Elsevier Ltd, 2015, pp. 1038–1045. doi: 10.1016/j.proeng.2015.01.226.
  35. S. Senyk, A. Chodkiewicz, K. Gocman, B. Szczęśniak, and T. Kałdoński, “Hexagonal Nano and Micro Boron Nitride: Properties and Lubrication Applications,” Materials, vol. 15, no. 3, Feb. 2022, doi: 10.3390/ma15030955.
  36. Yanmar, “Yanmar TF Series.” Accessed: Dec. 30, 2022. [Online]. Available: https://www.yanmar.com/en_id/engine/products/diesel/h_watercooled/tfseries/
  37. Y. Ali and M. A. Hanna, “Durability Testing of A Diesel Fuel, Methyl Tallowate, And Ethanol Blend In a Cummins N14-410 Diesel Engine,” Transactions of the ASAE, vol. Vol. 39(3), pp. 793–797, 1996.
  38. C. L. Peterson, J. C. Thompson, and J. S. Taberski, “One-Thousand-Hour Engine Durability Test With Hysee And Using A 5x-EMA Test Cycle,” Transactions of the ASAE, vol. VOL. 42(1), pp. 23–30, 1999.
  39. S. Sae, M. Ziejewski, H. J. Goettler, H. Haines, and C. Huang, “EMA Durability Tests on High Oleic Sunflower and Safflower Oils in Diesel Engines,” 2018.
  40. A. Z. M. Fathallah and F. Pinto, “The Influence of NaCl dissolved on biodiesel of used cooking oil on performance and its degradation of main components of diesel engine,” IOP Conf Ser Earth Environ Sci, vol. 972, no. 1, p. 012030, Jan. 2022, doi: 10.1088/1755-1315/972/1/012030.
  41. K. Nantha Gopal and R. Thundil Karuppa Raj, “Effect of pongamia oil methyl ester-diesel blend on lubricating oil degradation of di compression ignition engine,” Fuel, vol. 165, pp. 105–114, Feb. 2016, doi: 10.1016/j.fuel.2015.10.031.
  42. J. S. Evans, “Where Does All That Metal Come From?,” WearCheck Technical Bulletin Issue 47, 2010.
  43. A. Kotia, S. Borkakoti, and S. K. Ghosh, “Wear and performance analysis of a 4-stroke diesel engine employing nanolubricants,” Particuology, vol. 37, pp. 54–63, Apr. 2018, doi: 10.1016/j.partic.2017.05.016.
  44. Yanmar, Yanmar Service Manual: TF Series. Tokyo. Accessed: Dec. 30, 2022. [Online]. Available: https://www.yanmar.com/media/id/com/maintenance/catalog/100495.pdf
  45. Bureau for Chemical Substances, “ CLH Report For Boric Acid,” Lodz, Poland, 2013.
  46. M. Waqas, R. Zahid, M. U. Bhutta, Z. A. Khan, and A. Saeed, “A review of friction performance of lubricants with nano additives,” Nov. 01, 2021, MDPI. doi: 10.3390/ma14216310.

  Close
• %2025-%05-%29 pp. 1 - 7

  RANCANG BANGUN BODI MOBIL LISTRIK MENGGUNAKAN FIBERGLASS

  Zakaria Ramadhan, JURUSAN TEKNIK MESIN D3 UHO, Yasin, Yogi Prasetia, Sudarsono, Nanang Endriatno

  doi 10.55679/pistonjt.v10i1.84

  Views 92

  Abstract References PDF

  Referensi

  RANCANG BANGUN BODI MOBIL LISTRIK MENGGUNAKAN FIBERGLASS

  1. M. Adriana, A. Angkasa dan Masrianor. “Rancang Bangun Rangka (casis) Mobil Listrik Roda Tiga Kapasitas Satu Orang,” Jurnal Elemen, vol. 4, no. 2, Desember 2017.
  2. Endangkasia. Perancangan dan Pembuatan Chassis Mobil Listrik Kapasitas Angkut 4 Orang. https://textid.123dok.com/document/9ynlj0lqperancangan-dan-pembuatan-chassis-mobil-listrik-kapasitasangkut-4orang.html. Malang. 2012 (Diakses pada tanggal 15 Mei 2024).
  3. Suriyadi, U. Ibuhasa, M. Abdillah, Rizki, L. O. A. Barata, and Samhuddin, “Perancangan Pembuatan Kapal Tenaga Surya Skala Miniatur”, Piston-JT, vol. 7, no. 2, pp. 1–6, Dec. 2022.
  4. S. Alfissin, M. Z. Yuliadi dan D. Wahyudi. “Pengaruh Susunan Serat Laminasi Fiberglass terhadap Kekuatan Tarik dan Tekuk Material Menggunakan Variasi Chopped Standart Mat dan Woven Roving”, Jurnal Midship, vol. 2, no. 2, Oktober 2019.
  5. A. S. Haryono. Pemanfaatan Fiberglass Untuk Pembuatan Body Plastik Kendaraan Ahmad Haryono , ST. Politeknosains, 2011.
  6. P. H. Adiwibowo. “Rancang Bangun Bodi Mobil Listrik Garuda Unesa (Garnesa)”. JRM. vol. 01 no. 01, 2013.
  7. Alamsyah, T. Hidayat dan A. N. Iskandar. “Pengaruh Perbandingan Resin Dan Katalis Terhadap Kekuatan Tarik Komposit Fiberglass-Polyester Untuk Bahan Pembuatan Kapal”. Jurnal Inovasi Sains Dan Teknologi Kelautan. Vol. 2, No. 2, 2021.
  8. W. T. Nugroho. “Pengaruh Model Serat Pada Bahan Fiberglass Terhadap Kekuatan, Ketangguhan, Dan Kekerasan Material”. Jurnal Ilmiah Inovasi, vol. 15 no. 1, 2015.
  9. S. Rahmat, I. Firmansyah, A Affandi dan D. I. Putra. Pembuatan Bodi Prototype Mobil Hemat Energi Berbahan Fiberglass Di Politeknik Negeri Jember. Jurnal Teknik Terapan. Vol. 2. No. 2.
  10. I. A. Saputra, S. J. Purnomo dan A. Noorsetyo. 2019. Rancang Bangun Bodi Mobil Listrik Urban Concept Berbahan Fibercarbon. RIDTEM (Riset Diploma Teknik Mesin) Vol. 2 No. I.
  11. D. Tyagita, A. W. Pratama, dan D. B. Aprianto. 2019. Variasi Kadartiner Dan Temperatur Pengeringan Terhadap Kualitashasil Pengecatanbodi Kendaraan Berbahan ABS. J-Proteksion. Vol. 4No. 1.
  12. Pambudi S. 2017. Rancang Bangun Bodi Prototype Mobil Listrik “Elang Untidar” Berbahan Fiberglass. Program Studi Diploma III Teknik Mesin. Jurusan Teknik Mesin. Fakultas Teknik. Universitas Tidar.

  Close
• %2025-%06-%16 pp. 8 - 18

  Studi karakteristik energi surya untuk pemanenan energi: studi awal di Kota Kendari

  La Ode Ahmad Barata, Samhuddin, Rizqi Firti Naryanto, Mera Kartika Delimayanti, La Baride

  doi 10.55679/pistonjt.v10i1.85

  Views 107

  Abstract References PDF

  Referensi

  Studi karakteristik energi surya untuk pemanenan energi: studi awal di Kota Kendari

  1. Solargis, “Solar Resource and Photovoltaic Power Potensial of Indonesia,” 2017.
  2. IESR, “Peta jalan mempercepat pensiun pltu batubara pada 2045 (Roadmap to Accelerate the Retirement of Coal-Fired Power Plants at 2045).” Accessed: Dec. 30, 2024. [Online]. Available: https://iesr.or.id/peta-jalan-mempercepat-pensiun-pltu-batubara-pada-2045/
  3. ESDM, Handbook Of Energy & Economic Statistics Of Indonesia 2023. 2023.
  4. D. R. Armanda, “PEMANFAATAN PEMBANGKIT LISTRIK TENAGA SURYA (PLTS) PADA SISTEM KELISTRIKAN SULAWESI UTARA DAN GORONTALO,” Inst. Teknol. PLN, Jakarta, Indones., no. April, 2021.
  5. B. Indonesian Agency for Meteorology, Climatology, and Geophysics), “Dinamika Atmosfer.” Accessed: Jan. 25, 2025. [Online]. Available: https://www.bmkg.go.id/iklim/dinamika-atmosfer
  6. K. E. RI, Sultra Raih Penghargaan Dewan Energi Nasional. 2025.
  7. F. D. Putra, H. Radhiati, L. O. A. Barata, and L. K. Mangalla, “Studi Karakteristik PV Panel sebagai Pemanenan Energi Listrik : Efek Solar Tracking,” Enthalpy J. Ilm. Mhs. Tek. Mesin, vol. 10, no. 1, pp. 1–9, 2025, doi: http://dx.doi.org/10.55679/enthalpy.v9i4 1.
  8. GUBERNUR SULAWESI TENGGARA (South East Sulawesi Governor), RENCANA UMUM ENERGI DAERAH PROVINSI SULAWESI TENGGARA (Regional Energy General Plan). South East Sulawesi, 2021.
  9. L. A. Ningtyas, “Empat Kabupaten di Sultra Terima Bantuan PLTS.” Accessed: Apr. 15, 2025. [Online]. Available: https://www.rri.co.id/daerah/1341460/empat-kabupaten-di-sultra-terima-bantuan-plts
  10. D. G. Erbs, S. A. Klein, and J. A. Duffie, “Estimation of the diffuse radiation fraction for hourly, daily and monthly-average global radiation,” Sol. Energy, vol. 28, no. 4, pp. 293–302, 1982, doi: 10.1016/0038-092X(82)90302-4.
  11. L. C. Nethwadzi and H. Winkler, “Calculation of direct and diffuse solar irradiance components using a Slob Algorithm model in Gauteng conditions,” no. December 2018, 2019.
  12. N. Power, “Reports.” Accessed: Dec. 15, 2024. [Online]. Available: https://power.larc.nasa.gov/data-access-viewer/
  13. www.weatherspark.com, “Average Daily Incident Shortwave Solar Energy in Kendari.” Accessed: Jan. 25, 2025. [Online]. Available: https://weatherspark.com/y/137856/Average-Weather-in-Kendari-Indonesia-Year-Round
  14. M. Aljuwaysir Salah Fahad, K. Osman, U. Abidin, M. S. Ahmad, E. M. H. Ismaeil, and M. U. Farooq, “Review of Cooling Techniques for Improving Solar Photovoltaic Panel Efficiency,” J. Adv. Res. Fluid Mech. Therm. Sci., vol. 125, no. 1, pp. 193–219, 2025, doi: 10.37934/arfmts.125.1.193219.
  15. M. M. Abdel-Aziz and A. A. ElBahloul, “Innovations in improving photovoltaic efficiency: A review of performance enhancement techniques,” Energy Convers. Manag., vol. 327, no. March, p. 119589, Mar. 2025, doi: 10.1016/j.enconman.2025.119589.
  16. Muhammad Iqbal, An Introduction to Solar Radiation. Toronto: Academic Press, 1983. doi: 10.1016/b978-0-12-373750-2.x5001-0.
  17. M. H. Naraghi and E. Atefi, “Optimum Solar Panel Orientation and Performance: A Climatic Data-Driven Metaheuristic Approach,” Energies, vol. 15, no. 2, 2022, doi: 10.3390/en15020624.
  18. J. Ramos and J. A. Valladares, “University of XXX-solar radiation clearness and variability index,” ASEE Annu. Conf. Expo. Conf. Proc., 2014.
  19. S. Himran, Energi Surya: Konversi Termal dan Fotovoltaik (Solar Energi: Thermal Conversion and Photovolataic). ANDI, Yogyakarta, 2021.

  Close
• %2026-%06-%26 pp. 70 - 81

  Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

  Afdal Syarif, La Baride, Haryani Haryani, La Atina

  doi 10.55679/pistonjt.v11i1.140

  Views 57

  Abstract References PDF

  Referensi

  Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

  1. M. Victoria et al., “Solar photovoltaics is ready to power a sustainable future,” Joule, vol. 5, no. 5, pp. 1041–1056, doi: 10.1016/j.joule.2021.03.005.
  2. F. Afif, A. Martin, “Tinjauan Potensi dan Kebijakan Energi Surya di Indonesia,” J. Engine Energi, Manufaktur, dan Mater., vol. 6, no. 1, pp. 43–52, 2022.
  3. M. I. M.A.A. Mamun, M. Hasanuzzaman;, and J. Selvaraj, “Effect of tilt angle on the performance and electrical parameters of a PV module : Comparative indoor and outdoor experimental investigation maximum Power Point Tracker,” Energy Built Environ., vol. 3, no. 3, pp. 278–290, 2022, doi: 10.1016/j.enbenv.2021.02.001.
  4. Y. Zhang, J. Qi, Y. Yu, Q. Shi, and Z. Liu, “Influence of incidence angle effects on the performance of bifacial photovoltaic modules considering rear-side reflection,” Sol. Energy, vol. 245, no. oct., pp. 404–409, 2022, doi: 10.1016/j.solener.2022.08.027.
  5. A. Z. Hafez, A. M. Yousef, and N. M. Harag, “Solar tracking systems: Technologies and trackers drive types – A review,” Renew. Sustain. Energy Rev., vol. 91, pp. 754–782, 2018, doi: 10.1016/j.rser.2018.03.094.
  6. L. O. A. Barata, Samhuddin, R. F. Naryanto, M. K. Delimayanti, and L. Baride, “Studi Karakteristik Energi Surya untuk Pemanenan Energi: Studi Awal di Kota Kendari ”, Piston: Jurnal Teknologi, vol. 10, no. 1, pp. 8–18, 2025, doi: 10.55679/pistonjt.v10i1.85
  7. M. Efendi, R. I. Mainil, A. Aziz, U. Riau, and C. Author, “Comparison of the Efficiency of Solar PV Fixed, Single-Axis, and Dual-Axis Solar Trackers: A Review,” J. Konversi Energi dan Manufaktur, vol. 10, no. 1, pp. 84–93, 2025, doi: 10.21009/JKEM.10.1.9.
  8. E. E. Prasetiyo, G. Marausna, R. Rasmi, and D. Rahmiullah, “Analisis Perbandingan Hasil Daya Listrik Panel Surya Dengan dan Tanpa Solar Tracker,” JTT (Jurnal Teknol. Terpadu), vol. 10, no. 2, 2022, doi: 10.32487/jtt.v10i2.1426.
  9. F. D. Putra, H. Radhiati, L. O. A. Barata, and L. K. Mangalla, “Studi Karakteristik PV Panel sebagai Pemanenan Energi Listrik: Efek Solar Tracking”, Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin, vol. 10, no. 1, pp. 1–8, Feb. 2025, doi: 10.55679/enthalpy.v10i1.2.
  10. M. A. Al Sheikh;, “IoT-Enabled Dual-Axis Solar Tracking System Using ESP32 and Blynk for Real-Time Monitoring and Energy Optimization,” Jupiter Publ. Ilmu Keteknikan Ind. Tek. Elektro dan Inform., vol. 3, no. 1, pp. 187–204, 2025, doi: 10.61132/jupiter.v3i1.695.
  11. R. Ramful and N. Sowaruth, “Low-cost solar tracker to maximize the capture of solar energy in tropical countries,” Energy Reports, vol. 8, pp. 295–302, 2022, doi: 10.1016/j.egyr.2022.10.145.
  12. H. Nugroho, M. H. Kemal, F. H. Rumawan, and D. Suprihanto, “Penerapan Solar Tracking System Berlengan Ganda dengan Memanfaatkan Potensi Tenaga Surya,” vol. 8, no. 01, pp. 21–26, 2025, doi: 10.30651/cl.v8i01.23872.
  13. I. S. Osman, I. K. Almadani, N. G. Hariri, and T. S. Maatallah, “Experimental Investigation and Comparison of the Net Energy Yield Using Control-Based Solar Tracking Systems,” Int. J. Renew. Energy Res., vol. 8, no. 4, pp. 1123–1132, 2022, doi: 10.1155/2022/7715214.

  Close
• %2025-%12-%29 pp. 88 - 94

  Analisis Performa Boiler Standard Kessel Berdasarkan Rasio Bahan Bakar dan Steam di PT. XYZ

  Otong Jaelani, Ali Imron, Dibyo Setiawan, Edward Simanjuntak, Agus Subeno

  doi 10.55679/pistonjt.v10i2.117

  Views 62

  Abstract References PDF

  Referensi

  Analisis Performa Boiler Standard Kessel Berdasarkan Rasio Bahan Bakar dan Steam di PT. XYZ

  1. E. Simanjuntak, M. Idris, and Jufrizal, “Analisis Performa Boiler Berbahan Bakar Kombinasi Fiber Dan Cangkang Pada Boiler Takuma N-600 SA Analysis Of Boiler Performance Using Fiber And Shell Combinations In A Takuma,” IRA J. Tek. Mesin dan Apl., vol. 2, no. 1, pp. 34–42, 2023, doi: https://doi.org/10.56862/irajtma.v2i1.41.
  2. I. Muzaki and A. Mursadin, “Analisis Efisiensi Boiler dengan Metode Input– Output di PT. Japfa Comfeed Indonesia Tbk. Unit Banjarmasin,” Sci. J. Mech. Eng. Kinemat., vol. 4, no. 1, pp. 37–46, 2019, doi: 10.20527/sjmekinematika.v4i1.50.
  3. J. Syalsabila, Hendradinata, F. Putri, Safe’i, Siproni, and I. HB, “Anaslisa Efisiensi Thermal Boiler Tipe Circulation Fluidized BED Di PLTU 3x10MW,” Mach. J. Teknol. Terap., vol. 4, no. 3, pp. 159–166, 2023, doi: doi.org/10.5281/zenodo.10122406.
  4. S. Kurapa, A. Z. Syaiful, P. T. Kimia, F. Teknik, and U. Bosowa, “Desain Dan Kinerja Water Tube Boiler Untuk,” vol. 5, no. April, pp. 160–164, 2024, doi: https://doi.org/10.35965/saintis.v5i1.581.
  5. M. Fasola Putra, S. Wijayanto, and N. A. Pambudi, “Analisis Energi terhadap Performa Boiler Tipe Fluidized Bed Combustion,” J. Mek. dan Sist. Termal, vol. 1, no. 3, pp. 77–82, 2016, [Online]. Available: https://e-journal.janabadra.ac.id/index.php/JMST/article/view/PUTRA
  6. R. Djafar, “Analisis Termal Pada Boiler PLTU XYZ Menggunakan Metode Langsung Berdasarkan Data Operasi Harian,” J. Teknol. Pertan. Gorontalo, vol. 10, no. 1, pp. 28–33, 2025, doi: 10.30869/jtpg.v10i1.1466.
  7. M. Nasution and S. Napid, “Dalam Menentukan Efisiensi,” vol. 17, no. 3, pp. 314–319, 2022, doi: https://doi.org/10.30743/but.v17i3.5380.
  8. Y. Mulyani, I. Dhamayanthie, M. Irfan Hilmi, and I. Teknologi Petroleum Balongan, “The Efficiency of Water Tube Boiler Performance Using Direct Method on the Utility Unit,” Riwayat Educ. J. Hist. Humanit., vol. 6, no. 4, pp. 3232–3238, 2023, doi: https://doi.org/10.24815/jr.v6i4.36824.
  9. M. Sagaf, “Analisa faktor-faktor penyebab perubahan efisiensi boiler jenis pulverized coal fired forced circulation sub-critical pressure menggunakan metode tak langsung,” Teknoin, vol. 24, no. 2, pp. 147–158, 2018, doi: 10.20885/teknoin.vol24.iss2.art5.
  10. N. Asminah, S. Nurkhopipah, and N. Nurya, “Efektivitas Economizer Pada Boiler Z-1101 A di PT X Indramayu,” J. Profesi Ins. Univ. Lampung, vol. 5, no. 2, pp. 55–59, 2024, doi: 10.23960/jpi.v5n2.130.
  11. R. Hafis Ghifari, Nazaruddin, M. Nur, M. Isnaini Hadiyul Umam, and Suherman, “Performance Efficiency Analysis of Water Tube Boiler Machine Using Input Output Method and Fmea,” J. Perangkat Lunak, vol. 7, no. 1, pp. 32–44, 2025, doi: 10.32520/jupel.v7i1.3759.
  12. M. F. Putra, D. S. Wijayanto, and N. A. Pambudi, “Analisis Performa Boiler Basuki Berdasarkan Rasio Antara Bahan Bakar dan Steam di PT. Indo Acidatama Tbk.,” NOZEL J. Pendidik. Tek. Mesin, vol. 01, no. 02, pp. 91–96, 2019, doi: https://doi.org/10.20961/nozel.v1i1.28272.
  13. A. S. Wibowo, D. S. Wijayanto, and N. A. Pambudi, “Performa Boiler Alstom Berdasarkan Rasio Antara Bahan Bakar dan Steam di PT. Indo Acidatama Tbk.,” NOZEL J. Pendidik. Tek. Mesin, vol. 01, no. 03, pp. 274–280, 2019, doi: https://doi.org/10.20961/nozel.v2i3.42457.

  Close
• %2022-%12-%30 pp. 29 - 34

  Sistem Pendingin Pada Induced Draft Counter flow Cooling Tower

  Muhammad Alfian, La Ode Ahmad Barata, Nining Mahmuda Meliana

  doi 10.55679/pistonjt.v7i2.13

  Views 204

  Abstract References PDF

  Referensi

  Sistem Pendingin Pada Induced Draft Counter flow Cooling Tower

  1. J. H. Viljoen, C. J. Muller, & I. K. Craig, “Dynamic Modelling Of Induced Draft Cooling Towers With Parallel Heat Exchangers , Pumps And Cooling Water Network”, Journal Of Process Control, 68, 34–51, 2018.
  2. T. Irawan, “Kajian Analisis dan Konstruksi Menara Pendingin – Review”, Jurnal Engine: Energi, Manufaktur, dan Material, Vol.6, No.1, Hal. 53 – 62, 2022.
  3. M. Z. A. Hidayat, “Analisa kinerja cooling tower P.A Hlton dengan variasi laju aliran udara dan variasi temperatur air masuk terhadap efektivitas, Skripsi, Jurusan Teknik Mesin, Universitas Trisakti, 2021.
  4. B. T. Prasetyo, “Simulasi Numerik dan Validasi Experimental Distribusi Aliran Udara Di Dalam Cooling Tower”, Mesin, Vol. 9, No. 3, Hal. 190-194, 2007.
  5. J. C. Hensley, Cooling Tower Fundamentals (2nd Ed.), SPX Cooling Technologies, Inc, 2009.
  6. D. A. Fauzi, dan B. Rudiyanto, “Analisa Performa Menara Pendingin Pada PT Geo Dipa”, Jurnal Ilmiah Rotari, Vol.1, No.1, Hal. 25 – 32, 2015.
  7. A. Melkias, “ Analisa Performa pada Cooling Tower Jenis Mechanical Draft Crossflow”, Jurnal Teknik Energi, Vol. 10, No.1, hal. 24 – 28, 2020.
  8. Y.A. Cengel, “Heat Transfer – Practical Approach”, second edition, McGraw –Hill, 2007.
  9. S.R. Komarudin, & S.Y. Baskoro, “Analisis Pengaruh Penyerapan Kalor Terhadap Efisiensi Cooling Tower Pada Tungku Induksi Pengecoran Logam Di Polman Astra”, Bina Teknika, Vol.13, No.1, Hal. 11 – 21, 2017.

  Close