Search Results

• %2024-%12-%30 pp. 86 - 99

  Analisis Aliran Daya Terhadap Pengaruh Masuknya Gardu Induk Bombana Pada Sistem Sultra Menggunakan Software ETAP (Electrical Transient Electrical Program)

  Malikurrahim, Tachrir, Sahabuddin Hay, Mustarum Musaruddin, Yuni Koedoes, Agustinus Lolok, Gamal Abdel Nasser Masikki

  doi 10.55679/pistonjt.v9i2.81

  Views 124

  Abstract References PDF

  References

  Analisis Aliran Daya Terhadap Pengaruh Masuknya Gardu Induk Bombana Pada Sistem Sultra Menggunakan Software ETAP (Electrical Transient Electrical Program)

  1. L. O. A. Barata, “Sistem Perawatan Water Treatment Plant (WTP) PLTU Nii Tanasa 3 x 10 MW,” Pist. J. Teknol., vol. 9, no. 1, pp. 24–35, Jul. 2024, https://doi.org/10.55679/pistonjt.v9i1.56.
  2. Supriyadi, A. (2016). Analisa Aliran Daya Pada Sistem Tenaga Listrik Menggunakan Software ETAP 12.6.
  3. Swara Patra: Majalah Ilmiah PPSDM Migas, 6(3).
  4. Effendi, A., Dewi, A. Y., & Crismas, E. (2017). Analisa Drop Tegangan PT PLN (Persero) Rayon Lubuk Sikaping Setelah Penambahan PLTM Guntung. Jurnal Teknik Elektro, 6(2), 199-203.
  5. Ian Setiawan Nurdin,Syahabuddin Hay, & Mustamin (2019) .Analisa Aliran Daya Sistem Tenaga Listrik Sultra Setelah Penambahan PLTU Moramo Dengan Kapasitas 2x10 MW.
  6. Wahyu Aditya,Tachrir, & Syahabuddin Hay. (2023). Analisis Aliran Daya Sistem Sulawesi Tenggara Setelah Interkoneksinya Sistem Kendari 70 Kv Dan Sistem Kendari 150 Kv. FT UHO
  7. Djiteng Marsudi. (2006) “Buku Operasi Sistem Tenaga Listrik”Yogyakarta. ISBN: 979-756.
  8. Joko P., Montario C.B., dan Zamrudi, “Transmission of Electrical Energy (Transmisi Tenaga Listrik)”, Depok: Departemen Teknik Elektro Fakultas Teknik Universitas Indonesia, 2010.
  9. Sampeallo, A. S., Nursalim, N., & Fischer, P. J. (2019). Analisis Gangguan Hubung Singkat pada Jaringan Pemakaian Sendiri Pltu Bolok PT. Smse (Ipp) Unit 3 dan 4 Menggunakan Software Etap 12.6. 0. Jurnal Media Elektro, 76-85.
  10. Fauzi, A., Sulasno, S., & Sukmadi, T. (2011). Studi Analisis Pemilihan Tegangan Optimal Untuk Saluran Transmisi Daya Listrik (Doctoral dissertation, Jurusan Teknik Elektro Fakultas Teknik Undip).
  11. Syahputra, Ramadoni. "Transmisi dan Distribusi Tenaga Listrik." LP3M UMY, Yogyakarta (2016): 249-256.
  12. Purnomo Hery, 2016, ANALISIS SISTEM DAYA Bagian Saluran Transmisi Daya Elektrik, Malang : FT UB (Diambil dari : http://elektro.ub.ac.id/wp-content/uploads/2019/01/Buku-Analisis-Sistem-Daya.pdf
  13. Hasibuan, A., Isa, M., Yusoff, M. I., & Rahim, S. R. A. (2020). Analisa Aliran Daya Pada Sistem Tenaga Listrik Dengan Metode Fast Decoupled Menggunakan Software Etap. RELE (Rekayasa Elektrikal dan Energi): Jurnal Teknik Elektro, 3(1), 37-45.
  14. Djalal Muhammad Ruswandi, Chandra Yudhi Leo, Yunus Muhammad Yusuf, Nauwie Herman, 2014. Penyelesaian Aliran Daya 37 Bus Dengan Metode Newton Raphson (Diambil dari : http://repository.poliupg.ac.id/566/1/7.sinergi%20april%202014.pdf pada tanggal 16/03/2019 jam 15 : 16)
  15. Manjang Salama, Kitta Ikhlas, 2012, PENGUASAAN ETAP untuk APLIKASI SISTEM TENAGA LISTRIK, Makassar : Dua Satu Press
  16. Dwi Sulistiyono, “Perbandingan Metode Gauss-Seidel, Metode Newton Raphson Dan Metode Fast Decoupled Dalam Solusi Aliran Daya” Fakultas Teknik Universitas Diponegoro.
  17. Heru Dibyo Laksono, (2007) “STUDI ALIRAN DAYA DENGAN METODA FAST DECOUPLE (Aplikasi PT. PLN Sumbar-Riau 150 KV)”, Universitas Andalas Padang, Kampus Limau Manis Padang, Sumatera Barat. ISSN: 854-8471 No. 27 Vol.3.
  18. Hariyadi, S., & Umar, S. T. M. T. (2017). Analisis Rugi-Rugi Daya Dan Jatuh Tegangan Pada Saluran Transmisi Tegangan Tinggi 150 kV Pada Gardu Induk Palur–Masaran (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
  19. Bandri, S. (2016). Studi Settingan Distance Relay Pada Saluran Transmisi 150 kV di GI Payakumbuh Menggunakan Software MATLAB. Jurnal Teknik Elektro, 5(2), 108-112.
  20. Gunawan, S. M., & Sentosa, J. (2013). Analisa Perancangan Gardu Induk Sistem Outdoor 150 kV di Tallasa, Kabupaten Takalar, Sulawesi Selatan. Dimensi Teknik Elektro, 1(1), 37-42
  21. Sampeallo, A. S., Nursalim, N., & Fischer, P. J. (2019). Analisis Gangguan Hubung Singkat pada Jaringan Pemakaian Sendiri Pltu Bolok PT. Smse (Ipp) Unit 3 dan 4 Menggunakan Software Etap 12.6. 0. Jurnal Media Elektro, 76-85.
  22. https://dte.usu.ac.id/images/IMAGE/Modul_ETAP.pdf.
  23. [21] Akhmad, S. S., & Jamin, A. S. (2021, October). Pengujian Tahanan Isolasi pada Pemutus Tenaga (PMT) 20 kV Di Gardu Induk Tello 150 kV. In Seminar Nasional Teknik Elektro dan Informatika (SNTEI) (pp. 40-43).
  24. Saifudin, S., Haryudo, S. I., & Kartini, U. T. (2021). Analisis Perbandingan Perhitungan Short Circuit Pada Gardu Induk 150/20 KV (Studi Kasus Pada Gardu Induk Manyar Gresik). Jurnal Teknik Elektro, 10(2), 507-515.

  Close
• %2026-%06-%26 pp. 70 - 81

  Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

  Afdal Syarif, La Baride, Haryani Haryani, La Atina

  doi 10.55679/pistonjt.v11i1.140

  Views 57

  Abstract References PDF

  References

  Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

  1. M. Victoria et al., “Solar photovoltaics is ready to power a sustainable future,” Joule, vol. 5, no. 5, pp. 1041–1056, doi: 10.1016/j.joule.2021.03.005.
  2. F. Afif, A. Martin, “Tinjauan Potensi dan Kebijakan Energi Surya di Indonesia,” J. Engine Energi, Manufaktur, dan Mater., vol. 6, no. 1, pp. 43–52, 2022.
  3. M. I. M.A.A. Mamun, M. Hasanuzzaman;, and J. Selvaraj, “Effect of tilt angle on the performance and electrical parameters of a PV module : Comparative indoor and outdoor experimental investigation maximum Power Point Tracker,” Energy Built Environ., vol. 3, no. 3, pp. 278–290, 2022, doi: 10.1016/j.enbenv.2021.02.001.
  4. Y. Zhang, J. Qi, Y. Yu, Q. Shi, and Z. Liu, “Influence of incidence angle effects on the performance of bifacial photovoltaic modules considering rear-side reflection,” Sol. Energy, vol. 245, no. oct., pp. 404–409, 2022, doi: 10.1016/j.solener.2022.08.027.
  5. A. Z. Hafez, A. M. Yousef, and N. M. Harag, “Solar tracking systems: Technologies and trackers drive types – A review,” Renew. Sustain. Energy Rev., vol. 91, pp. 754–782, 2018, doi: 10.1016/j.rser.2018.03.094.
  6. L. O. A. Barata, Samhuddin, R. F. Naryanto, M. K. Delimayanti, and L. Baride, “Studi Karakteristik Energi Surya untuk Pemanenan Energi: Studi Awal di Kota Kendari ”, Piston: Jurnal Teknologi, vol. 10, no. 1, pp. 8–18, 2025, doi: 10.55679/pistonjt.v10i1.85
  7. M. Efendi, R. I. Mainil, A. Aziz, U. Riau, and C. Author, “Comparison of the Efficiency of Solar PV Fixed, Single-Axis, and Dual-Axis Solar Trackers: A Review,” J. Konversi Energi dan Manufaktur, vol. 10, no. 1, pp. 84–93, 2025, doi: 10.21009/JKEM.10.1.9.
  8. E. E. Prasetiyo, G. Marausna, R. Rasmi, and D. Rahmiullah, “Analisis Perbandingan Hasil Daya Listrik Panel Surya Dengan dan Tanpa Solar Tracker,” JTT (Jurnal Teknol. Terpadu), vol. 10, no. 2, 2022, doi: 10.32487/jtt.v10i2.1426.
  9. F. D. Putra, H. Radhiati, L. O. A. Barata, and L. K. Mangalla, “Studi Karakteristik PV Panel sebagai Pemanenan Energi Listrik: Efek Solar Tracking”, Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin, vol. 10, no. 1, pp. 1–8, Feb. 2025, doi: 10.55679/enthalpy.v10i1.2.
  10. M. A. Al Sheikh;, “IoT-Enabled Dual-Axis Solar Tracking System Using ESP32 and Blynk for Real-Time Monitoring and Energy Optimization,” Jupiter Publ. Ilmu Keteknikan Ind. Tek. Elektro dan Inform., vol. 3, no. 1, pp. 187–204, 2025, doi: 10.61132/jupiter.v3i1.695.
  11. R. Ramful and N. Sowaruth, “Low-cost solar tracker to maximize the capture of solar energy in tropical countries,” Energy Reports, vol. 8, pp. 295–302, 2022, doi: 10.1016/j.egyr.2022.10.145.
  12. H. Nugroho, M. H. Kemal, F. H. Rumawan, and D. Suprihanto, “Penerapan Solar Tracking System Berlengan Ganda dengan Memanfaatkan Potensi Tenaga Surya,” vol. 8, no. 01, pp. 21–26, 2025, doi: 10.30651/cl.v8i01.23872.
  13. I. S. Osman, I. K. Almadani, N. G. Hariri, and T. S. Maatallah, “Experimental Investigation and Comparison of the Net Energy Yield Using Control-Based Solar Tracking Systems,” Int. J. Renew. Energy Res., vol. 8, no. 4, pp. 1123–1132, 2022, doi: 10.1155/2022/7715214.

  Close
• %2022-%12-%30 pp. 16 - 22

  Sistem Pengunci Pintu Otomatis Menggunakan Sensor Fingerprint Berbasis Arduino

  Ardian Sumantri, La Ode Ahmad Barata, Salimin

  doi 10.55679/pistonjt.v7i2.17

  Views 120

  Abstract References PDF

  References

  Sistem Pengunci Pintu Otomatis Menggunakan Sensor Fingerprint Berbasis Arduino

  1. Santoso A.W., "SISTEM KEAMANAN PINTU LABORATORIUM BERBASIS SENSOR FINGERPRINT DAN MAGNETIC LOCK," JTT (Jurnal Teknologi Terapan), vol. 6, no. 1, pp. 84-92, 1 march 2020.
  2. Ikbal et al., "Sistem Keamanan Ganda Menggunakan Fingerprint dan Keypad Pada Pintu Rumah (Smart Security System)," pp. 175-178, 2019.
  3. Supriatno et al., MICROCONTROLLER ARDUINO UNTUK PEMULA (Disertai Contoh-Contoh Projek Yang Menginspirasi), Malang: Jasakom, 2019.
  4. S. Giri Wahyu Pambudi, Belajar Arduino from Zero to Hero, vol. 1, cronyos.com, 2020.
  5. Suhaeb et al., MIKROKONTROLER DAN INTERFACE, Makassar: UNM, 2017.

  Close
• %2025-%06-%16 pp. 8 - 18

  Studi Karakteristik Energi Surya untuk Pemanenan Energi: Studi Awal di Kota Kendari

  La Ode Ahmad Barata, Samhuddin, Rizqi Firti Naryanto, Mera Kartika Delimayanti, La Baride

  doi 10.55679/pistonjt.v10i1.85

  Views 107

  Abstract References PDF

  References

  Studi Karakteristik Energi Surya untuk Pemanenan Energi: Studi Awal di Kota Kendari

  1. Solargis, “Solar Resource and Photovoltaic Power Potensial of Indonesia,” 2017.
  2. IESR, “Peta jalan mempercepat pensiun pltu batubara pada 2045 (Roadmap to Accelerate the Retirement of Coal-Fired Power Plants at 2045).” Accessed: Dec. 30, 2024. [Online]. Available: https://iesr.or.id/peta-jalan-mempercepat-pensiun-pltu-batubara-pada-2045/
  3. ESDM, Handbook Of Energy & Economic Statistics Of Indonesia 2023. 2023.
  4. D. R. Armanda, “PEMANFAATAN PEMBANGKIT LISTRIK TENAGA SURYA (PLTS) PADA SISTEM KELISTRIKAN SULAWESI UTARA DAN GORONTALO,” Inst. Teknol. PLN, Jakarta, Indones., no. April, 2021.
  5. B. Indonesian Agency for Meteorology, Climatology, and Geophysics), “Dinamika Atmosfer.” Accessed: Jan. 25, 2025. [Online]. Available: https://www.bmkg.go.id/iklim/dinamika-atmosfer
  6. K. E. RI, Sultra Raih Penghargaan Dewan Energi Nasional. 2025.
  7. F. D. Putra, H. Radhiati, L. O. A. Barata, and L. K. Mangalla, “Studi Karakteristik PV Panel sebagai Pemanenan Energi Listrik : Efek Solar Tracking,” Enthalpy J. Ilm. Mhs. Tek. Mesin, vol. 10, no. 1, pp. 1–9, 2025, doi: http://dx.doi.org/10.55679/enthalpy.v9i4 1.
  8. GUBERNUR SULAWESI TENGGARA (South East Sulawesi Governor), RENCANA UMUM ENERGI DAERAH PROVINSI SULAWESI TENGGARA (Regional Energy General Plan). South East Sulawesi, 2021.
  9. L. A. Ningtyas, “Empat Kabupaten di Sultra Terima Bantuan PLTS.” Accessed: Apr. 15, 2025. [Online]. Available: https://www.rri.co.id/daerah/1341460/empat-kabupaten-di-sultra-terima-bantuan-plts
  10. D. G. Erbs, S. A. Klein, and J. A. Duffie, “Estimation of the diffuse radiation fraction for hourly, daily and monthly-average global radiation,” Sol. Energy, vol. 28, no. 4, pp. 293–302, 1982, doi: 10.1016/0038-092X(82)90302-4.
  11. L. C. Nethwadzi and H. Winkler, “Calculation of direct and diffuse solar irradiance components using a Slob Algorithm model in Gauteng conditions,” no. December 2018, 2019.
  12. N. Power, “Reports.” Accessed: Dec. 15, 2024. [Online]. Available: https://power.larc.nasa.gov/data-access-viewer/
  13. www.weatherspark.com, “Average Daily Incident Shortwave Solar Energy in Kendari.” Accessed: Jan. 25, 2025. [Online]. Available: https://weatherspark.com/y/137856/Average-Weather-in-Kendari-Indonesia-Year-Round
  14. M. Aljuwaysir Salah Fahad, K. Osman, U. Abidin, M. S. Ahmad, E. M. H. Ismaeil, and M. U. Farooq, “Review of Cooling Techniques for Improving Solar Photovoltaic Panel Efficiency,” J. Adv. Res. Fluid Mech. Therm. Sci., vol. 125, no. 1, pp. 193–219, 2025, doi: 10.37934/arfmts.125.1.193219.
  15. M. M. Abdel-Aziz and A. A. ElBahloul, “Innovations in improving photovoltaic efficiency: A review of performance enhancement techniques,” Energy Convers. Manag., vol. 327, no. March, p. 119589, Mar. 2025, doi: 10.1016/j.enconman.2025.119589.
  16. Muhammad Iqbal, An Introduction to Solar Radiation. Toronto: Academic Press, 1983. doi: 10.1016/b978-0-12-373750-2.x5001-0.
  17. M. H. Naraghi and E. Atefi, “Optimum Solar Panel Orientation and Performance: A Climatic Data-Driven Metaheuristic Approach,” Energies, vol. 15, no. 2, 2022, doi: 10.3390/en15020624.
  18. J. Ramos and J. A. Valladares, “University of XXX-solar radiation clearness and variability index,” ASEE Annu. Conf. Expo. Conf. Proc., 2014.
  19. S. Himran, Energi Surya: Konversi Termal dan Fotovoltaik (Solar Energi: Thermal Conversion and Photovolataic). ANDI, Yogyakarta, 2021.

  Close
• %2022-%06-%30 pp. 46-56

  Monitoring suplai Listrik Berbasis SMS Gateway Bandara Halu Oleo

  Hanika Pasang, Gamal Abdel Nasser, Sahabuddin Hay, Waode Zulkaidah, St. Nawal Jaya

  doi 10.55679/pistonjt.v7i1.28

  Views 88

  Abstract References PDF

  References

  Monitoring suplai Listrik Berbasis SMS Gateway Bandara Halu Oleo

  1. H. Koyuko and A. S. X. N. N. Alicia, "PERANCANGAN APLIKASI MONITORING PEMADAMAN LISTRIK BERBASIS ANDROID STUDI KASUS PT.PLN AREA MANADO," Jurnal Teknik Informatika, vol. 9, no. 1, pp. 1-11, 2016.
  2. H. Muchtar and R. Sumanjaya, "Control Switch Otomatis pada Tegangan Energi Alternatif dan Tegangan Sumber PLN Menggunakan Raspberry Pi," RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer), vol. 1, no. 2, pp. 97-102, 2018.
  3. R. A. Dalimunthe, "PEMANTAU ARUS LISTRIK BERBASIS ALARM DENGAN SENSOR ARUS MENGGUNAKAN MIKROKONTROLLER ARDUINO UNO," in Seminar Nasional Royal (SENAR) 2018, Kisaran, Asahan, Sumut, 2018.
  4. A. Kadir, Panduan Praktis Mempelajari Aplikasi Mikrokontroler dan Pemrogramannya Menggunakan Arduino, Yogyakarta: Andi Offset, 2013.
  5. B. Gustamo, Pengenalan Arduino Dan Pemrogrammannya, Bandung: Informatika Bandung, 2015.

  Close
• %2024-%07-%02 pp. 24 - 35

  Sistem Perawatan Water Treatment Plant (WTP) PLTU Nii Tanasa 3 x 10 MW

  La Ode Ahmad Barata

  doi 10.55679/pistonjt.v9i1.56

  Views 142

  Abstract References PDF

  References

  Sistem Perawatan Water Treatment Plant (WTP) PLTU Nii Tanasa 3 x 10 MW

  1. Y. A. Çengel and M. A. Boles, “Thermodynamics: An Engineering Approach”, 5th ed, McGraw-Hill, 2006.
  2. Hibatullah, Iqmal, A Syuriadi, & Fachruddin, "Identifikasi Kemunculan Scaling pada Sistem SeaWater Reverse Osmosis (SWRO)," Seminar Nasional Teknik Mesin [Online], 9.1 pp. 1130-1137, 2019.
  3. PT. PLN (Persero) - Asian tec Limited, “30m3 Sea Water Reserved Osmosis Sistem – Equipment Manual PLTU 3x10 MW Kendari Sulawesi Tenggara”, 4 – 2009.
  4. H. La Bau, M. F. Safli, Sudarsono, and L. O. A. Barata, “Analisa Keselamatan dan Kesehatan Kerja Pada Pengoperasian Forklift di PT.Equiport Inti Indonesia”, Piston-JT, vol. 7, no. 2, pp. 7–15, Dec. 2022. https://doi.org/10.55679/pistonjt.v7i2.7
  5. Dewantara, I.G. Yogi, B.M. Suyitno, dan I. G.E. Lesmana, “Desalinasi Air Laut Berbasis Energi Surya Sebagai Alternatif Penyediaan Air Bersih”, Jurnal Teknik Mesin, 7(1), pp. 01- 4, 2018.
  6. http://dx.doi.org/10.22441/jtm.v7i1.2124.
  7. Ragetisvara, A.Anandea, dan H.S.Titah, ‘Studi Kemampuan Desalinasi Air Laut Menggunakan Sistem Sea Water Reverse Osmosis (SWRO) Pada Kapal Pesiar’, Jurnal Teknik ITS, 10.2 (2021). https://doi.org/10.12962/j23373539.v10i2. 63933.
  8. Sefentry dan R. Masriatini, “Pemanfaatan Teknologi Membran Reverse Osmosis (RO) Pada Proses Pengolahan Air Laut menjadi Air Bersih”, Redoks, vol. 5, no. 1, pp. 58–64, May 2020.
  9. https://doi.org/10.31851/redoks.v5i1.4128.

  Close
• %2025-%12-%28 pp. 75 - 82

  Rancang Bangun Mesin Penggiling Daging dengan Tenaga Penggerak Motor Listrik

  Rivaldy, La Ode Ahmad Barata, Salimin

  doi 10.55679/pistonjt.v10i2.112

  Views 138

  Abstract References PDF

  References

  Rancang Bangun Mesin Penggiling Daging dengan Tenaga Penggerak Motor Listrik

  1. Manalu, P., Tambunan, A., & Siahaan, E., Rancang Bangun Mesin Penggiling Daging Kapasitas 8 Kg/Jam, Jurnal Teknologi Mesin UDA, 3(2), pp. 245 – 256, 2022
  2. Ahmad Syahrizal Hamdani, Zetyawan Ardan, Muh. Maftuh, and Krismon La Maru, “Perancangan Mesin Penggiling Jagung untuk Pakan Ternak”, Piston-JT, vol. 8, no. 2, pp. 06–13, Dec. 2023.
  3. F. Maghfurah, Windarta, Mulyadi, N. Ramadhani, D. Iqbal, and Prasetyo Lody, “Konsep Desain Screw dan Propeller pada Penggiling Daging dan Adonan serta Pisau Pemotong Adonan Baso,” 2024, pp. 1–8. [Online]. Available: http://jurnal.umj.ac.id/index.php/semnaslit.
  4. M. Sinaga, dan A.Z. Hayda, “Analisa Perancangan dan BEP Ekonomis Mesin Penggiling Daging berbahan Poros S50C dengan Daya Motor 0,5 HP”, Journal Kajian Teknik Mesin, Vol.8 (1), pp. 64- 72, 2023.
  5. Herlambang, Analisis Alat Peggiling Daging Konsumsi dengan penggerak motor Listrik AC Kapasitas 6 kg/jam, Tugas Akhir, Fakultas Teknik, Universitas Krisnadwipayana, Jakarta, 2021.
  6. Porawati dan Kurniawan, “Mesin Penggiling Daging (Meat Grinder) Kapasitas 8 KG Menggunakan Motor Listrik”, Inovator, Vol. 1. No.2, pp. 1- 2, 2018
  7. Napitupulu, R. K., Purba, J. S., & Naibaho, W. (2022). Analisa Variasi Saringan Mesin Penggiling Daging Ayam Kapasitas 1 Kg Terhadap Waktu. Jurnal Teknik Mesin, 15(2), 109 - 114. https://doi.org/10.30630/jtm.15.2.958
  8. M.R.S. Ardiansyah, “Perencanaan Mesin Penggiling Daging dengan Kapasitas 5 kg”, Tugas Akhir Sarjana, Program Studi Teknik Mesin, Universitas Gresik, 2022.

  Close
• %2024-%07-%02 pp. 15 - 23

  Perancangan Mesin Pencacah Rumput Pakan Ternak Menggunakan Sistem Penggerak Motor Listrik

  Sofian Efendi, Mijer, Aditia Warman, Sarlan, Budiman Sudia

  doi 10.55679/pistonjt.v9i1.55

  Views 93

  Abstract References PDF

  References

  Perancangan Mesin Pencacah Rumput Pakan Ternak Menggunakan Sistem Penggerak Motor Listrik

  1. Umam, K., Putra Munir, A., & Sigalingging, D. R. (2018). RANCANG BANGUN ALAT PENCACAH PELEPAH SAWIT TIPE SERUT (Design of Planer mode Oil Palm Midrib Chopper). In Keteknikan Pertanian J.Rekayasa Pangan dan Pert (Vol. 6, Issue 2).
  2. N. Endriatno and L. O. A. Barata, “Rancangan Mesin Pengayak Pasir dengan Konversi Sistem Gerak Rotasi menjadi Translasi”, Piston-JT, vol. 8, no. 1, pp. 23–29, Jun. 2023. https://doi.org/10.55679/pistonjt.v8i1.41
  3. Erick Patollong, Muh. Rizal Ode, Lukas Kano Mangalla, dan Aminur, “Mesin Penghancur Cangkang Kerang ”, Piston-JT, vol. 8, no. 1, pp. 10–15, Jul. 2023. https://doi.org/10.55679/pistonjt.v8i1.25
  4. Andrian, M., Rala, S., Asmara, S., & Suharyatun, S. (n.d.). PENGARUH KECEPATAN PUTAR TERHADAP UNJUK KERJA MESIN PENCACAH PELEPAH KELAPA SAWIT (CHOPPER)TIPE TEP-1 THE EFFECT OF SPEED ROTATION TO THE PERFORMANCE OF PALM OIL MIDRIB CHOPPER MACHINE TEP-1 TYPE. In Jurnal Teknik Pertanian Lampung (Vol. 6, Issue 3).
  5. Bulan, R., Mandang, T., Hermawan, W., Desrial, D., & Agussabti, A. (2018). Design and Performance of an Integrated Machine for Chopping Oil Palm Leaves and Compressing Fronds. Jurnal Keteknikan Pertanian, 6(1), 1–8. https://doi.org/10.19028/jtep.06.1.83-90
  6. Hasbi Assiddiq S, Asrul, & Pratama Hermanto. (2022). Rancang Bangun Mesin Pencacah Rumput dan Pelepah Kelapa Sawit dengan Penggerak Motor Bensin Sebagai Pakan Ternak. Infotekmesin, 13(2), 212–218. https://doi.org/10.35970/infotekmesin.v13i2.1530
  7. Fitri Arriyani, Y., Dwi Krishnaningsih, S., & Teknik Mesin Politeknik Manufaktur Negeri Bangka Belitung, J. (2021). Kinerja Mesin Pencacah Pelepah Kelapa Sawit Dengan Sistem Rotary. Jurnal Teknologi Manufaktur, 13(02).
  8. Prananda, F., Balaka, R., Endriatno, N., (2024). Analisis Perancangan Alat Pencacah Nilam Untuk Petani Nilam. 9(1), 13–19. http://ojs.uho.ac.id/index.php/ENTHALPY
  9. Randi, H., Sidik, S., Manggalla, K. L., Salimin, (2023). Perancangan dan Pengujian Mesin Spinner Peniris Vertikal Untuk Industri Rumah Tangga Menggunakan Penggerak Motor Listrik. Jurnal Ilmiah Mahasiswa Teknik Mesin, 8(3), 82–88. https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/42772/18840

  Close
• %2023-%12-%29 pp. 35 - 45

  Sistem Perawatan pada Mesin Pembangkit/Genset pada PT. Menara Bosowa Menggunakan Metode Running test

  Untung Saputra, Rahmat Aprian Arif, Safar Dune, La Ode Savirno

  doi 10.55679/pistonjt.v8i2.49

  Views 102

  Abstract References PDF

  References

  Sistem Perawatan pada Mesin Pembangkit/Genset pada PT. Menara Bosowa Menggunakan Metode Running test

  1. B. SAPUTRO, “ANALISIS KEANDALAN GENERATOR SET SEBAGAI POWER SUPPLY DARURAT APABILA POWER SUPPLY DARI PLN MENDADAK PADAM DI MORODADI POULTRY SHOP BLITAR”, quateknika, vol. 7, no. 2, pp. 17-25, Sep. 2017.
  2. A. M. Nugraha, A.A.A. Putra dan W. Saputra, “Laporan Kuliah Kerja Praktek PT. Semen Bosowa Maros (Instrument Control dan Automation Control), Politeknik ATI Makassar, 2019.
  3. D. R. Pamungkas, B.T. Bhirawa, B. Arianto, “Analisis Performansi Pemeliharaan Generator Set (Genset) Dengan Metode TPM (Total Productive Maintenance) Untuk Meningkatkan Kinerja di PT. Lativi Media Karya”, Jurnal Teknik Industri, 8(9), 2019, https://doi.org/10.35968/jtin.v8i1.803.
  4. D. Aribowo, Desmira, D.A. Fauzan, “Sistem Perawatan Mesin Genset di PT (Persero) Pelabuhan Indonesia II”, Prosiding Seminar Nasional Pendidikan FKIP Universitas Sultan Ageng Tirtayasa, Vol. 3, No.1, 2020, hal. 580-594.
  5. Zainal, F. Azim, E.M. Rangkuti, “Analisa Sistem Perawatan Mesin Genset dan Biaya-Biayanya di PT. PLN (Persero) Area Medan, Juripol, Vol. 3 No. 2, 2020.
  6. Prasetijo, Hari, et al. "Generator Magnet Permanen Sebagai Pembangkit Listrik Putaran Rendah." Dinamika Rekayasa, vol. 8, no. 2, Aug. 2012, pp. 70-77, DOI:10.20884/1.dr.2012.8.2.106.

  Close
• %2023-%12-%26 pp. 14 - 21

  Rancang Bangun Handle Forklift Berbasis Sistem Aktuator Linear Electrical Kapasitas 40kg

  Burhanuddin, Miner, Alif Darmawan B., Andi Sulaeman

  doi 10.55679/pistonjt.v8i2.45

  Views 93

  Abstract References PDF

  References

  Rancang Bangun Handle Forklift Berbasis Sistem Aktuator Linear Electrical Kapasitas 40kg

  1. R. Firdaus, “Rancang Bangun Prototipe Forfklift Manual Dengan Kapasitas Angkat 200 kg”, Proyek Akhir, Politeknik Negeri Sriwijaya, 2015.
  2. Zulpan, Muhammad (2019), “mini forklift design with a maximum capacity of 5 kg”, Mecomare , 4(10) pp.188-194, 2022.
  3. Syamtidar, “Rancang Bangun Alat Pengangkat Garpu Hand Forklift berkapasitas 200 kg Menggunakan Sistem Penggerak Motor Electric Winch”. Proyek akhir, Akademi Teknik Industri Makassar, 2018.
  4. H. La Bau, M. F. Safli, Sudarsono, and L. O. A. Barata, “Analisa Keselamatan dan Kesehatan Kerja Pada Pengoperasian Forklift di PT. Equiport Inti Indonesia”, Piston-JT, vol. 7, no. 2, pp. 7–15, Dec. 2022. https://doi.org/10.55679/pistonjt.v7i2.7.
  5. N., Alviernandi, “KESESUAIAN PROSEDUR OPERASI FORKLIFT DI PT. X DENGAN SAFE OPERATION FORKLIFT OSHA”. Jakarta: Binawan.ac.id, 2018.
  6. Boedianto, Yohanes, “PERANCANGAN SISTEM PENGANGKAT PADA FORKLIFT”, Yogyakarta: usd.ac.id, 2007.

  Close
• %2026-%07-%04 pp. 91 - 97

  Perancangan Sistem Dog Clutch Transmisi Prototipe Diesel Berbasis Analisis FEM dan Pengujian Mekanik Material

  Husna Drajat RN, Amirul Siddiq, Prasetyo

  doi 10.55679/pistonjt.v11i1.142

  Views 99

  Abstract References PDF

  References

  Perancangan Sistem Dog Clutch Transmisi Prototipe Diesel Berbasis Analisis FEM dan Pengujian Mekanik Material

  1. H. M. Ardi, M. M. Fahmi, N. Fajri, and Y. A. Wiraputra, “Overhaul dan Uji Performansi Generator Firman,” vol. 12, no. 1, 2026.
  2. D. Setiawan, R. Jatnika, D. M. Muthohhary, I. Azmy, and T. Okviyanto, “Optimasi Performa Mesin Diesel Matsumoto MDX- 178F melalui Modifikasi Intake dan Exhaust,” vol. 12, no. 1, 2026.
  3. S. R. Asep Sukmayadi, “Pedoman Kontes Mobil Hemat Energi (KMHE) Perguruan Tinggi 2024,” 2024.
  4. F. M. Huda, S. Anis, M. B. Laroybafih, and D. F. Fitriyana, “Rancang Bangun Dog Clutch Transmission System Pada Kendaraan Mobil Hemat Energi Urate Evo-7 Pandawa Team,” vol. 10, no. 2, pp. 51–56, 2025, doi: http://dx.doi.org/10.55679/enthalpy.v9i4.
  5. H. M. Ardi, M. M. Fahmi, D. Setiawan, and M. Y. Efendi, “Perencanaan Transmisi Mekanik Roda Gigi dan Generator Turbin Vorteks PLTMH,” J. Tek. Mesin, vol. 20, no. 2, pp. 55–63, 2023, doi: 10.9744/jtm.20.2.55-63.
  6. H. Widiantoro, D. Eka, S. Arifin, D. Setiawan, and A. P. I. P, “Analisis Kekuatan Fishing Tools Holder 50 . 000 LBS Menggunakan Metode Finite Element,” J. Crankshaft, vol. 6, no. 3, pp. 68–79, 2023, doi: https://doi.org/10.24176/crankshaft.v6i3.11557.
  7. S. Pradhan, B. Biswal, G. A. Sharma, A. Nayak, and H. R. Behera, “Finite Element Analysis of Dog Clutch Plate Using Numerical Methods,” vol. 8, no. 8, pp. 612–622, 2021, doi: 10.17148/IARJSET.2021.88101.
  8. G. Pahl, W. Beitz, J. Feldhusen, and K.-H. Grote, Engineering Design: A Systematic Approach, 3rd ed. London: Springer London, 2007. doi: 10.1007/978-1-84628-319-2.
  9. R. E. Firdausah, N. Ilminnafik, and M. Asrofi, “Performance of a Single Cylinder Diesel Engine Fueled by 40 % Biodiesel Blend with Excess Air System,” 2025, doi: 10.31284/j.jmesi.2025.v5i1.6917.
  10. W. D. C. Jr. and David G. Rethwisch, Materials Science and Engineering: An Introduction, 10th ed. Wiley, 2018.
  11. S. Y. Purwanto, Elemen Mesin. Yogyakarta: Akprind Press, 2018.
  12. R. C. Hibbeler, Mechanics of Materials, 10th ed. Pearson, 2016.
  13. Y. Aktir, Jean-François Brunel, Philippe Dufrenoy, and Hervé Mahé, “Three-dimensional finite element model of an automotive clutch for analysis of axial vibrations,” Proc. Inst. Mech. Eng. Part D J. Automob. Eng., vol. 230, no. 10, pp. 1324–1337, 2016, doi: 10.1177/0954407015607377.
  14. C. Duan, “Analytical Study of a Dog Clutch in Automatic Transmission Application,” SAE Int. J. Passeng. Cars – Mech. Syst., vol. 7, no. 3, pp. 1155–1162, 2014, doi: 10.4271/2014-01-1775.

  Close
• %2022-%06-%30 pp. 1-10

  Rancang Bangun Alat Pembangkit Uap Menggunakan Energi Surya

  Aldiyanto, Adib Satono, Kadek Edy Susanto, Wandi Haryansa, Rival Kahfi Gama, La Hasanudin, Aminur

  doi 10.55679/pistonjt.v7i1.18

  Views 126

  Abstract References PDF

  References

  Rancang Bangun Alat Pembangkit Uap Menggunakan Energi Surya

  1. Widayana, I. Gede dan Wiratmaja I. Gede, 2012, “Kesehatan dan Keselamatan Kerja”, Yogyakarta: Graha Ilmu.
  2. Yohana, Eflita, dan Akshabulyamin, 2012, “Perhitungan Efisisensi dan Konversi dari Bahan Bakar Solar ke Gas pada Boiler, EBARA HKL 1800KA”, Jurnal Teknik Mesin, 14: pp 7-10.
  3. J.P. Holman, 1983, “Heat Transfer sixth edition”, McGraw Hill : London
  4. W. D Raharjo, dan Karnowo, 2008, “Mesin Konversi Energi”, Semarang: Universitas Semarang Press.
  5. A. Muin, Syamsir, 1998, “Pesawat-Pesawat Konversi Energi I (Ketel Uap)”, Edisi Pertama, Jakarta: Penerbit CV. Rajawali.

  Close
• %2023-%06-%30 pp. 01 - 09

  Rancang Bangun Mesin Pengering Skala Miniatur Dengan Kapasitas 0,5 HP

  Ryan Aspari, Septianus T.L., Arnold Oscar F.R., La Ode Ahmad Barata, Jaka Seru Dwi Saputra

  doi 10.55679/pistonjt.v8i1.14

  Views 149

  Abstract References PDF

  References

  Rancang Bangun Mesin Pengering Skala Miniatur Dengan Kapasitas 0,5 HP

  1. Adamsyah, M.S. & Mulyadi, "Perancangan Alat Pengering Kerupuk dengan Menggunakan Pemanas Heater," R.E.M (Rekayasa Energi Manufaktur), vol. 4, no. 1, pp. 27-51, 2019.
  2. A. Rahmat Saleh, M. Ridwan Agung, L. N. Wahyudin, and M. J. Firdaus, “Pengering Cengkeh Menggunakan Oven”, Piston-JT, vol. 7, no. 1, pp. 29–35, Jun. 2022.
  3. Kaplale, R.A., Rawung, H., Tooy, D., "PENGERINGAN BIJI PALA (Myristica fragrans Houtt) MENGGUNAKAN ENERGI RADIASI MATAHARI DAN LPG (Liquefied Petroleum Gas) DENGAN BANTUAN ALAT PENGERING", Cocos, Vol.10, no. 8, 2018.
  4. Majid, A., Kardiman, and Hanifi, R., "Perancangan Alat Bantu untuk Optimalisasi Proses Produksi Sayap Cover Blower di CV. DEF," Jurnal Ilmiah Wahana Pendidikan, vol. 8, no. 12, pp. 25-32, 2022.
  5. Hariri, H., and Nugroho, F.H., "Perancangan Alat Pengering Cengkeh Berkapasitas 30 kg Berbasis Arduino," Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, vol. 11, no. 2, pp. 122-128, 2021.
  6. Arhamsyah, M., Syam, H., dan Jamalaudin, "MODIFIKASI MESIN PENGERING DENGAN MEMANFAATKAN UDARA PANAS DARI ELEMEN PEMANAS LISTRIK," Jurnal Pendidikan Teknologi Pertanian, vol. 4, 2018.

  Close
• %2025-%12-%30 pp. 103 - 112

  Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

  M Faizur Rijal Azhad, Parman, Immanuel Fredy Augustino, Rahmat Basya Shahrys Tsany, Dicki Nizar Zulfika

  doi 10.55679/pistonjt.v10i2.118

  Views 99

  Abstract References PDF

  References

  Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

  1. H. I. Kim, J. Shon, and K. Lee, “A study of fuel economy and exhaust emission according to engine coolant and oil temperature,” Journal of Thermal Science and Technology, vol. 8, no. 1, pp. 255–268, 2013, doi: 10.1299/jtst.8.255.
  2. K. Holmberg and A. Erdemir, “Influence of tribology on global energy consumption, costs and emissions,” Sep. 01, 2017, Tsinghua University Press. doi: 10.1007/s40544-017-0183-5.
  3. K. Holmberg and A. Erdemir, “The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars,” Tribol Int, vol. 135, pp. 389–396, Jul. 2019, doi: 10.1016/j.triboint.2019.03.024.
  4. J. Luo and X. Zhou, “Superlubricitive engineering—Future industry nearly getting rid of wear and frictional energy consumption,” Aug. 01, 2020, Tsinghua University Press. doi: 10.1007/s40544-020-0393-0.
  5. G. Vaitkunaite, C. Espejo, B. Thiebaut, A. Neville, and A. Morina, “Low friction tribofilm formation and distribution on an engine cylinder tested with MoDTC-containing low viscosity engine lubricants,” Tribol Int, vol. 171, p. 107551, Jul. 2022, doi: 10.1016/j.triboint.2022.107551.
  6. L. Guan, X. L. Feng, G. Xiong, and J. A. Xie, “Application of dielectric spectroscopy for engine lubricating oil degradation monitoring,” Sens Actuators A Phys, vol. 168, no. 1, pp. 22–29, Jul. 2011, doi: 10.1016/j.sna.2011.03.033.
  7. Theo. Mang and Wilfried. Dresel, Lubricants and lubrication. Wiley-VCH, 2007.
  8. M. S. Charoo and M. F. Wani, “Tribology in Industry Tribological Properties of IF-MoS 2 Nanoparticles as Lubricant Additive on Cylinder Liner and Piston Ring Tribo-pair,” 2016. [Online]. Available: www.tribology.fink.rs
  9. W. Ahmed Abdalglil Mustafa, F. Dassenoy, M. Sarno, and A. Senatore, “A review on potentials and challenges of nanolubricants as promising lubricants for electric vehicles,” Lubrication Science, vol. 34, no. 1, pp. 1–29, Jan. 2022, doi: 10.1002/ls.1568.
  10. A. Devaraj, M. Nagappan, D. Yogaraj, O. Prakash, Y. A. Rao, and A. Sharma, “Influence of nano-additives on engine behaviour using diesel-biodiesel blend,” Mater Today Proc, Apr. 2022, doi: 10.1016/j.matpr.2022.03.598.
  11. J. Zhao, Y. Huang, Y. He, and Y. Shi, “Nanolubricant additives: A review,” Oct. 01, 2021, Tsinghua University. doi: 10.1007/s40544-020-0450-8.
  12. P. Gangwani, M. K. Gupta, and J. Bijwe, “Synergism between particles of PTFE and hBN to enhance the performance of oils,” Wear, vol. 384–385, pp. 169–177, 2017, doi: 10.1016/j.wear.2017.01.053.
  13. A. v. Bondarev, A. Fraile, T. Polcar, and D. v. Shtansky, “Mechanisms of friction and wear reduction by h-BN nanosheet and spherical W nanoparticle additives to base oil: Experimental study and molecular dynamics simulation,” Tribol Int, vol. 151, Nov. 2020, doi: 10.1016/j.triboint.2020.106493.
  14. M. I. H. C. Abdullah, M. F. bin Abdollah, H. Amiruddin, N. Tamaldin, and N. R. M. Nuri, “Optimization of tribological performance of hBN/AL2O3 nanoparticles as engine oil additives,” in Procedia Engineering, Elsevier Ltd, 2013, pp. 313–319. doi: 10.1016/j.proeng.2013.12.185.
  15. S. Shahnazar, S. Bagheri, and S. B. Abd Hamid, “Enhancing lubricant properties by nanoparticle additives,” Jan. 30, 2016, Elsevier Ltd. doi: 10.1016/j.ijhydene.2015.12.040.
  16. A. Kotia, K. Chowdary, I. Srivastava, S. K. Ghosh, and M. K. A. Ali, “Carbon nanomaterials as friction modifiers in automotive engines: Recent progress and perspectives,” Jul. 15, 2020, Elsevier B.V. doi: 10.1016/j.molliq.2020.113200.
  17. A. Tomala et al., “Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions,” Tribol Int, vol. 129, pp. 137–150, Jan. 2019, doi: 10.1016/j.triboint.2018.08.005.
  18. S. Shahnazar, S. Bagheri, and S. B. Abd Hamid, “Enhancing lubricant properties by nanoparticle additives,” Int J Hydrogen Energy, vol. 41, no. 4, pp. 3153–3170, Jan. 2016, doi: 10.1016/j.ijhydene.2015.12.040.
  19. W. Dai, B. Kheireddin, H. Gao, and H. Liang, “Roles of nanoparticles in oil lubrication,” Tribol Int, vol. 102, pp. 88–98, Oct. 2016, doi: 10.1016/j.triboint.2016.05.020.
  20. O. Tevet, P. Von-Huth, R. Popovitz-Biro, R. Rosentsveig, H. D. Wagner, and R. Tenne, “Friction mechanism of individual multilayered nanoparticles,” Proceedings of the National Academy of Sciences, vol. 108, no. 50, pp. 19901–19906, Dec. 2011, doi: 10.1073/pnas.1106553108.
  21. M. Kalin, J. Kogovšek, and M. Remškar, “Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives,” Wear, vol. 280–281, pp. 36–45, Mar. 2012, doi: 10.1016/j.wear.2012.01.011.
  22. C. Kumara, D. N. Leonard, H. M. Meyer, H. Luo, B. L. Armstrong, and J. Qu, “Palladium Nanoparticle-Enabled Ultrathick Tribofilm with Unique Composition,” ACS Appl Mater Interfaces, vol. 10, no. 37, pp. 31804–31812, Sep. 2018, doi: 10.1021/acsami.8b11213.
  23. S. Zhang, L. Hu, D. Feng, and H. Wang, “Anti-wear and friction-reduction mechanism of Sn and Fe nanoparticles as additives of multialkylated cyclopentanes under vacuum condition,” Vacuum, vol. 87, pp. 75–80, Jan. 2013, doi: 10.1016/j.vacuum.2012.07.009.
  24. J. Padgurskas, R. Rukuiza, I. Prosyčevas, and R. Kreivaitis, “Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles,” Tribol Int, vol. 60, pp. 224–232, Apr. 2013, doi: 10.1016/j.triboint.2012.10.024.
  25. J. M. Liñeira del Río, E. R. López, and J. Fernández, “Synergy between boron nitride or graphene nanoplatelets and tri(butyl)ethylphosphonium diethylphosphate ionic liquid as lubricant additives of triisotridecyltrimellitate oil,” J Mol Liq, vol. 301, p. 112442, Mar. 2020, doi: 10.1016/j.molliq.2020.112442.
  26. J. M. Liñeira del Río, E. R. López, and J. Fernández, “Tribological properties of graphene nanoplatelets or boron nitride nanoparticles as additives of a polyalphaolefin base oil,” J Mol Liq, vol. 333, Jul. 2021, doi: 10.1016/j.molliq.2021.115911.
  27. O. N. Çelik, N. Ay, and Y. Göncü, “Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel,” Particulate Science and Technology, vol. 31, no. 5, pp. 501–506, Sep. 2013, doi: 10.1080/02726351.2013.779336.
  28. Y. Wang, Z. Wan, L. Lu, Z. Zhang, and Y. Tang, “Friction and wear mechanisms of castor oil with addition of hexagonal boron nitride nanoparticles,” Tribol Int, vol. 124, pp. 10–22, Aug. 2018, doi: 10.1016/j.triboint.2018.03.035.
  29. H. Baş and Y. E. Karabacak, “Investigation of the Effects of Boron Additives on the Performance of Engine Oil,” Tribology Transactions, vol. 57, no. 4, pp. 740–748, Jul. 2014, doi: 10.1080/10402004.2014.909549.
  30. T. Akbiyik, N. Kahraman, and T. Taner, “Investigation of the effect of boron additive to lubricating oil on engine performance, exhaust, and emissions,” Fuel, vol. 312, Mar. 2022, doi: 10.1016/j.fuel.2021.122931.
  31. M. Ilman Hakimi Chua Abdullah, M. Fadzli Bin Abdollah, H. Amiruddin, N. Tamaldin, N. Rashid Mat Nuri, and A. Rafeq Saleman, “The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine,” Journal of Mechanical Engineering, vol. 1, no. 1, pp. 103–112, 2017.
  32. N. Thachnatharen, M. Khalid, A. Arulraj, and N. Sridewi, “Tribological performance of hexagonal boron nitride (hBN) as nano-additives in military grade diesel engine oil,” in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 70–73. doi: 10.1016/j.matpr.2021.04.145.
  33. N. Nomède-Martyr, M. Vitulin, H. Joseph, and P. Thomas, “Moringa oil with graphite and hexagonal boron nitride particles as additives for lubrication,” Diam Relat Mater, vol. 124, Apr. 2022, doi: 10.1016/j.diamond.2022.108930.
  34. Q. Wan, Y. Jin, P. Sun, and Y. Ding, “Tribological behaviour of a lubricant oil containing boron nitride nanoparticles,” in Procedia Engineering, Elsevier Ltd, 2015, pp. 1038–1045. doi: 10.1016/j.proeng.2015.01.226.
  35. S. Senyk, A. Chodkiewicz, K. Gocman, B. Szczęśniak, and T. Kałdoński, “Hexagonal Nano and Micro Boron Nitride: Properties and Lubrication Applications,” Materials, vol. 15, no. 3, Feb. 2022, doi: 10.3390/ma15030955.
  36. Yanmar, “Yanmar TF Series.” Accessed: Dec. 30, 2022. [Online]. Available: https://www.yanmar.com/en_id/engine/products/diesel/h_watercooled/tfseries/
  37. Y. Ali and M. A. Hanna, “Durability Testing of A Diesel Fuel, Methyl Tallowate, And Ethanol Blend In a Cummins N14-410 Diesel Engine,” Transactions of the ASAE, vol. Vol. 39(3), pp. 793–797, 1996.
  38. C. L. Peterson, J. C. Thompson, and J. S. Taberski, “One-Thousand-Hour Engine Durability Test With Hysee And Using A 5x-EMA Test Cycle,” Transactions of the ASAE, vol. VOL. 42(1), pp. 23–30, 1999.
  39. S. Sae, M. Ziejewski, H. J. Goettler, H. Haines, and C. Huang, “EMA Durability Tests on High Oleic Sunflower and Safflower Oils in Diesel Engines,” 2018.
  40. A. Z. M. Fathallah and F. Pinto, “The Influence of NaCl dissolved on biodiesel of used cooking oil on performance and its degradation of main components of diesel engine,” IOP Conf Ser Earth Environ Sci, vol. 972, no. 1, p. 012030, Jan. 2022, doi: 10.1088/1755-1315/972/1/012030.
  41. K. Nantha Gopal and R. Thundil Karuppa Raj, “Effect of pongamia oil methyl ester-diesel blend on lubricating oil degradation of di compression ignition engine,” Fuel, vol. 165, pp. 105–114, Feb. 2016, doi: 10.1016/j.fuel.2015.10.031.
  42. J. S. Evans, “Where Does All That Metal Come From?,” WearCheck Technical Bulletin Issue 47, 2010.
  43. A. Kotia, S. Borkakoti, and S. K. Ghosh, “Wear and performance analysis of a 4-stroke diesel engine employing nanolubricants,” Particuology, vol. 37, pp. 54–63, Apr. 2018, doi: 10.1016/j.partic.2017.05.016.
  44. Yanmar, Yanmar Service Manual: TF Series. Tokyo. Accessed: Dec. 30, 2022. [Online]. Available: https://www.yanmar.com/media/id/com/maintenance/catalog/100495.pdf
  45. Bureau for Chemical Substances, “ CLH Report For Boric Acid,” Lodz, Poland, 2013.
  46. M. Waqas, R. Zahid, M. U. Bhutta, Z. A. Khan, and A. Saeed, “A review of friction performance of lubricants with nano additives,” Nov. 01, 2021, MDPI. doi: 10.3390/ma14216310.

  Close
• %2022-%12-%30 pp. 1 - 6

  Perancangan Pembuatan Kapal Tenaga Surya Skala Miniatur

  Suriyadi, Ungo Ibuhasa, Muhammad Abdillah, Rizki, La Ode Ahmad Barata, Samhuddin

  doi 10.55679/pistonjt.v7i2.15

  Views 268

  Abstract References PDF

  References

  Perancangan Pembuatan Kapal Tenaga Surya Skala Miniatur

  1. J. Nursanto, I. Yusuf, dan K.H. Kwee, "Perancangan Perahu Tenaga Surya di Kota Pontianak" Laporan Tugas Akhir, Jurusan Teknik Elektro, Universitas Tanjung Pura.
  2. I. M. A. Nugraha, “Penggunaan Pembangkit Listrik Tenaga Surya Sebagai Sumber Energi Pada Kapal Nelayan: Suatu Kajian Literatur,” J. Sumberd. Akuatik Indopasifik, vol. 4, no. 2, p. 101, 2020, doi: 10.46252/jsai-fpik-unipa.2020.vol.4.no.2.76.
  3. M. A. S. Ardhana, et al., “Kapal Bertenaga Surya Ittelkom Surabaya,” Lomba Karya Tulis, pp. 193–198, 2020, [Online]. Available: https://journal.ittelkom-sby.ac.id/lkti/article/view/38.
  4. Z. Tharo, S. Anisah, J. Ginting, and B. S. Kusuma, “Rrancang Bangun Simulator Kapal Motor Menggunakan Pa,nel surya ” , S e m i n a r o f S o c i a l S c i e n c e s E n g i n e e r i n g Hu m a n i o ra, pp. 249–261, 2020.
  5. M. T. I. Joesianto, E. Poetro, R. H. Catur, and A. Z. Arfianto, “ANALISIS KEBUTUHAN DAYA LISTRIK KAPAL WISATA KAPASITAS 10 ORANG BERBASIS TENAGA MATAHARI,” vol. 3, no. 2, pp. 3–7, 2020.

  Close
• %2025-%07-%01 pp. 48 - 53

  Analisis Perbandingan Kinerja Injektor Mesin Wartsila W20V34DF pada Beban 0 kW dan 3000 kW Menggunakan Simulasi CFD

  Budi Sutrisno, Dedy Ashari, La Ode Ichlas Syahrullah Yunus, La Ode Abdul Gamsir, Akhmad Fadli Ibrahim, Yuvita Satriani Djuli

  doi 10.55679/pistonjt.v10i1.96

  Views 72

  Abstract References PDF

  References

  Analisis Perbandingan Kinerja Injektor Mesin Wartsila W20V34DF pada Beban 0 kW dan 3000 kW Menggunakan Simulasi CFD

  1. J. Smith and A. Johnson, "Impact of fuel injector spray characteristics on combustion efficiency in large bore marine engines," Journal of Marine Engineering & Technology, vol. 19, no. 3, pp. 187-195, (2024).
  2. L. Chen and H. Wang, "Numerical investigation of fuel spray and combustion in a direct injection engine using CFD," Applied Energy, vol. 301, p. 117432, (2023).
  3. M. P. Kumar and S. R. Reddy, "Analysis of diesel engine injector nozzle wear and its effect on engine performance and emissions,"International Journal of Engine Research, vol. 23, no. 1, pp. 132-145, (2022).
  4. R. Sharma and V. Gupta, "Computational fluid dynamics analysis of fuel injection and mixing in internal combustion engines: A review,"Energy Reports, vol. 7, pp. 110-125, (2021).
  5. Y. Zhang, L. Wang, and X. Liu, "Injector performance and emission characteristics," Energy Reports, vol. 6, pp. 123-130, (2020).
  6. K. Li, P. Li, and J. Liu, "CFD simulation of fuel spray and combustion in a common rail diesel engine," Combustion and Flame, vol. 205, pp. 1-12, (2023).
  7. Tegar Armanto., Analisis Computational Fluid Dynamics (CFD) Sistem Pemanasan Dan Pendinginan Bioreaktor Fermentasi Kopi (2024).
  8. Saputra, A. Simulasi Aliran Fluida Dengan Variasi Penempatan Injektor Pada Intake Manifold Mesin 2 Langkah Menggunakan Cfd (Doctoral Dissertation, Universitas Negeri Jakarta) (2024).

  Close
• %2021-%06-%30 pp. 1 -9

  Analisis Kekuatan Konstruksi Pada Alat Angkat Kapasitas 500 Kg Menggunakan Software Comsol Multiphysics

  Lukas Kano Mangalla, Samhuddin

  doi 10.55679/pistonjt.v6i1.37

  Views 117

  Abstract References PDF

  References

  Analisis Kekuatan Konstruksi Pada Alat Angkat Kapasitas 500 Kg Menggunakan Software Comsol Multiphysics

  1. S. Bakri, ”PERANCANGAN PORTABLE CRANE KAPASITAS ANGKAT 500 KG”. Undergraduate (S1) thesis, University of Muhammadiyah Malang, 2018.
  2. R. Setiawan, Sudarsono, Sugiarto, “PERANCANGAN PORTABLE CRANE KAPASITAS ANGKAT MAKSIMAL 500 KG”, E-Jurnal Teknik Mesin, Vol.1 No.2, Juni 2014.
  3. Rudenko N., Mesin Pemindah Bahan, Cet.1, Penerbit Erlangga, Jakarta, 1992.
  4. Comsol Multiphysic, “Reference manual”, www.comsol.com, diakses 28 Oktober 2020
  5. A. Rahim dan Jamaludin,”Rancang bangun alat angkat kapasitas 500kg”,Tugas Akhir DIII teknik mesin UHO,Kendari, 2015

  Close
• %2025-%01-%05 pp. 80 - 85

  Pradesain Mesin Cuci Mobil Semi Otomatis Menggunakan Autodesk Inventor

  Samhuddin, La Ode Ahmad Barata, Jaka Seru Dwi Saputra

  doi 10.55679/pistonjt.v9i2.78

  Views 86

  Abstract References PDF

  References

  Pradesain Mesin Cuci Mobil Semi Otomatis Menggunakan Autodesk Inventor

  1. M. Emer, A. Manna, and Y. Saleh, “Automatic Car Washing Machine,” 2019.
  2. M. Zhang, “Design of Automatic Car Washing Machine System based on Image Processing,” Acad. J. Eng. Technol. Sci., vol. 2, no. 4, pp. 30–35, 2019, doi: 10.25236/AJETS.2019.020405.
  3. L. B. Pratama, S. Sumaryo, and Estananto, “PERANCANGAN PROTOTYPE PENGERINGAN PADA SISTEM PENCUCI MOBIL OTOMATIS ( DRYING PROTOTYPE DESIGN IN AUTOMATIC CAR WASHING SYSTEMS ),” 2019, pp. 10091–10096.
  4. M. Aswan, I. P. S. Negara, and I. G. O. Pujihadi, “Analisis Tegangan Pada Design Frame Mini Crane Portable Menggunakan Software Autodesk Inventor,” Semin. Nas. Terap. Ris. Inov. Ke-XX, vol. 7, no. 1, pp. 9–16, 2021.
  5. N. Endriatno, La Ode Ahmad Barata, and Salimin, “Analisis Kekuatan Rangka Mesin Pencacah Nilam dengan Menggunakan Metode Elemen Hingga,” Pist. J. Teknol., vol. 9, no. 2, pp. 56–64, Dec. 2024, doi: 10.55679/pistonjt.v9i2.74.
  6. Sularso., Dasar Perencanaan Dan Pemilihan Elemen Mesin. Jakarta: PT. Pradnya Paramita, 2002.
  7. S. Timoshenko, Strength of Materials. Van Nostrand, 1955.
  8. A. E. Prasetiyanto and C. P. Hadisusila, “Aplikasi Arduino dalam Teknik I/O untuk Mengintegrasikan dan Mengendalikan Perangkat Elektronik,” Nusant. Eng., vol. 6, no. 2, pp. 96–102, 2023, doi: 10.29407/noe.v6i2.21308.

  Close
• %2023-%12-%26 pp. 01 - 05

  Rancang Bangun Mesin Penyerut Es Batu

  Faisal Ahmad, Ardin Wiranata, Jabal Nur, Syukur Muzakkir

  doi 10.55679/pistonjt.v8i2.43

  Views 85

  Abstract References PDF

  References

  Rancang Bangun Mesin Penyerut Es Batu

  1. Aizul Latif, “RANCANG BANGUN MESIN PENGHANCUR ES BATU SEBAGAI PENDINGIN IKAN (BAGIAN STATIS)”, 2019.
  2. Dhimaz Seta Anggoro, Ismail, Pramonowibowo, “Strategi Pengembangan Pelabuhan Perikanan Samudra (PPS) Kendari, Kota Kendari, Sulawesi Tenggara”, 2015.
  3. Indra Haryanto, “Perancangan Mesin Serut Es Semi Otomatis Dengan Kapasitas 2 Menit/Balok”, 2016.
  4. Arifin, Afif Abyan Wahyu and Utama Handika Prasetya, “RANCANG BANGUN MESIN PEMECAH ES BATU UNTUK PENGAWETAN IKAN”, 2022.
  5. Suriyadi, U. Ibuhasa, M. Abdillah, Rizki, L. O. A. Barata, and Samhuddin, “Perancangan Pembuatan Kapal Tenaga Surya Skala Miniatur”, Piston-JT, vol. 7, no. 2, pp. 1–6, Dec. 2022.
  6. Sularso dan Kiyokatsu Suga, “Dasar Perencanaan Dan Pemilihan Elemen Mesin”, Jakarta: PT. Pradnya Paramita, 1997.
  7. T. Azwar, Pribadyo, “Perencanaan Ulang Transmisi Daya Mekanik Mesin Penghancur Es Balok Di Pasar Bina Usaha Di Kota Meulaboh”, 2015.

  Close