Vol. 10 No. 2 (2025): Desember 2025

Published: 2025-12-27

DOI: 10.55679/pistonjt.v10i2

Articles pp. 67 - 74

Rancang Bangun Mesin Perajang Singkong Menggunakan Tenaga Penggerak Motor Listrik

Arifin, Maksin, Al Ichlas Imran, Aminur

doi 10.55679/pistonjt.v10i2.113

Views 98

Abstract PDF
References

Rancang Bangun Mesin Perajang Singkong Menggunakan Tenaga Penggerak Motor Listrik

Murwan Dwi Prasetio, Sheila Amalia Salma, Dino Caesaron, Nur Ikhsan R, A. P. N., “Rancangan Alat Pemotong Singkong Otomatis Untuk Meningkatkan Produktivitas Dan Kualitas Produksi Keripik Singkong Di Desa Sukapura” Jurnal Charity, vol. 5, no.01, pp 9-17, 2022.

Nidia Lestari, Hadi Saputra, Taufik Hidayat, Y. P., “Implementasi Mesin Pemotong Singkong dalam Upaya Pemberdayaan Masyarakat” Jurnal Januari, vol.02, no.01, pp 53–62, 2024.

Hasbi Assidiq, Mochamad Bastomi, Jeffry Anggara, A., “Perancangan Dan Pembuatan Mesin Perajang Singkong Menggunakan Motor Listrik 0, 5 Hp” Jurnal Teknik Mesin, vol.01, no.01, pp 1–9, 2022.

Sri Enda Susilowati, Didit Sumardianto, Fajri Hidayat, Muktar Sinaga, A. S., ”Alat Perajang Singkong Dengan Sistem Serut Untuk Usaha Rumahan Di Daerah Kampak, Jawa Timur” Jurnal Berdikari, vol. 06, no.01, pp 26–32, 2023.

Sir Anderson, Khairul Amri, Harfardi, R. P., ”Pembuatan Mesin Pengiris Singkong Pada Usaha Industri Rumah Tangga Dengan Kapasitas 40kg/Jam”, Jurnal Teknik Mesin, 15(2), 72–77, 2022. https://doi.org/10.30630/jtm.15.2.789

F. Malau, B. Sitorus, T.Hasballah, ”Rancang Bangun Mesin Perajang Ubi Kayu Untuk Keripik Dengan Pendorong Berbasis Bandul Kapasitas 30 Kg/Jam”. 3(2), 95–106, 2022.

Yudha, V., & Nugroho, N. (2020). Rancang Bangun Mesin Perajang Singkong dengan Pendorong Pegas. Quantum Teknika : Jurnal Teknik Mesin Terapan, 2(1). https://doi.org/10.18196/jqt.020118

Pamungkas, S. A., ”Rancang Bangun Mesin Pemotong Singkong Semi Otomatis Dilengkapi Dengan Autowasher”, JRM, 06, 5–24, 2021.

A. Aljufri, A. Rahman, S. Akmal, R. Firmansyah, and A. A. Chaniago, “Perancangan Mesin Modifikasi Camshaft Tipe Single Cutter Menggunakan Autodesk Inventor”, JurTek: Jurnal Teknologi, vol. 15, no. 2, pp. 299–304, Aug. 2023.

Analisis Material Kontruksi Chasis Mobil Listrik Laksamana V2 Menggunakan Software Autodesk Inventor”, Machine, vol. 7, no. 1, pp. 30–37, Apr. 2021, doi: 10.33019/jm.v7i1.1931.

Samhuddin, L. O. A. Barata, and J. S. D. Saputra, “Pradesain Mesin Cuci Mobil Semi Otomatis Menggunakan Autodesk Inventor”, Piston-JT, vol. 9, no. 2, pp. 80–85, Jan. 2025.
Articles pp. 75 - 82

Rancang Bangun Mesin Penggiling Daging dengan Tenaga Penggerak Motor Listrik

Rivaldy, La Ode Ahmad Barata, Salimin

doi 10.55679/pistonjt.v10i2.112

Views 138

Abstract PDF
References

Rancang Bangun Mesin Penggiling Daging dengan Tenaga Penggerak Motor Listrik

Manalu, P., Tambunan, A., & Siahaan, E., Rancang Bangun Mesin Penggiling Daging Kapasitas 8 Kg/Jam, Jurnal Teknologi Mesin UDA, 3(2), pp. 245 – 256, 2022

Ahmad Syahrizal Hamdani, Zetyawan Ardan, Muh. Maftuh, and Krismon La Maru, “Perancangan Mesin Penggiling Jagung untuk Pakan Ternak”, Piston-JT, vol. 8, no. 2, pp. 06–13, Dec. 2023.

F. Maghfurah, Windarta, Mulyadi, N. Ramadhani, D. Iqbal, and Prasetyo Lody, “Konsep Desain Screw dan Propeller pada Penggiling Daging dan Adonan serta Pisau Pemotong Adonan Baso,” 2024, pp. 1–8. [Online]. Available: http://jurnal.umj.ac.id/index.php/semnaslit.

M. Sinaga, dan A.Z. Hayda, “Analisa Perancangan dan BEP Ekonomis Mesin Penggiling Daging berbahan Poros S50C dengan Daya Motor 0,5 HP”, Journal Kajian Teknik Mesin, Vol.8 (1), pp. 64- 72, 2023.

Herlambang, Analisis Alat Peggiling Daging Konsumsi dengan penggerak motor Listrik AC Kapasitas 6 kg/jam, Tugas Akhir, Fakultas Teknik, Universitas Krisnadwipayana, Jakarta, 2021.

Porawati dan Kurniawan, “Mesin Penggiling Daging (Meat Grinder) Kapasitas 8 KG Menggunakan Motor Listrik”, Inovator, Vol. 1. No.2, pp. 1- 2, 2018

Napitupulu, R. K., Purba, J. S., & Naibaho, W. (2022). Analisa Variasi Saringan Mesin Penggiling Daging Ayam Kapasitas 1 Kg Terhadap Waktu. Jurnal Teknik Mesin, 15(2), 109 - 114. https://doi.org/10.30630/jtm.15.2.958

M.R.S. Ardiansyah, “Perencanaan Mesin Penggiling Daging dengan Kapasitas 5 kg”, Tugas Akhir Sarjana, Program Studi Teknik Mesin, Universitas Gresik, 2022.
Articles pp. 83 - 87

Pemodelan Maket Menara Conventional Land Rig Sebagai Penerapan Project Based Learning Dalam Peralatan Pemboran dan Produksi

Rachmasari Pramita Wardhani, Dorisno Patulak, Leo Agung Yusuf, Alvin Palullungan, Marselius Sarira

doi 10.55679/pistonjt.v10i2.114

Views 36

Abstract PDF
References

Pemodelan Maket Menara Conventional Land Rig Sebagai Penerapan Project Based Learning Dalam Peralatan Pemboran dan Produksi

IADC, “IADC Drilling Manual. Internasion-al Association of Drilling Contractors, 2000.

M.B. Daulay , Risnawita, Aniswita & U. Rahmi. “Analisis Penggunaan Model Pembelajaran Missouri Mathematics Project (MMP)pada Pembelajaran Matematika dalam Meningkatkan Hasil Belajar”, J-CEKI: Jurnal Cendikia Ilmiah, Vol.3, No.5, pp.4922-4930, Agustus 2024.

A. Nurhadiyati, R. Rusdinal, and Y. Fitria, “Pengaruh Model Project Based Learning (PJBL) terhadap Hasil Belajar Siswa di Sekolah Dasar”, Basicedu, vol. 5, no. 1, pp. 327–333, Dec. 2020.

I. Nurasiah, A. Marini, M. Nafiah, and N. Rachmawati, “Nilai Kearifan Lokal: Projek Paradigma Baru Program Sekolah Penggerak untuk Mewujudkan Profil Pelajar Pancasila”, basicedu, vol. 6, no. 3, pp. 3639–3648, Mar. 2022. DOI: https://doi.org/10.31004/basicedu.v6i3.2727.

M.Rizqi & P.Mahardi, Pengembangan Media Maket Pada Mata Pelajaran Desain Pemodelan Jalan dan Jembatan di SMK Negeri 1 Kemlagi, Jurnal Kajian Pendidikan Teknik Bangunan, Vol. 11 No. 1, Hal. 62-76, 2025. https://doi.org/10.26740/jkptb.v11i1.66323.

A. A. Tsaabitah, N. B. Segara, S. P. Prasetya, and K. G. Setyawan, “Pengembangan Media Maket Gunungapi Untuk Pembelajaran Mitigasi Bencana dalam Pendidikan IPS”, JDPIPS, vol. 3, no. 3, pp. 1–9, Oct. 2023. https://doi.org/10.26740/penips.v3i3.55408.

Sudjana,Nana dan A.Rivai. Media Pengajaran. Bandung: Sinar Baru Algensindo. 2010.

S. Alya, A.,Yeni, A.Muliasari, S. Masitoh,, S, S,O.Mukarromah. Analisis Penggunaan Alat Peraga Berbagai Jenis Tatasurya untuk 0media Pembelajaran disekolah dasar, Serumpun Mengajar, Vol 2, No.7, pp. 1-8, April 2025.

Sugiyono, “Metode Penelitian Kuantitatif Kualitatif dan R&D”, Bandung: Penerbit Alfabeta, Tinarbuko, Sumbo. 2012.

A.Syaihul, A.Abidah & T.Natsir. Pengembangan Media Pembelajaran Maket Pada Mata Pelajaran Pelaksanaan Dan Pengawasan Konstruksi Gedung. Pinisi Journal of Education. Vol. 2 No. 6, 2022.

E.Doni, G.Hardiansyah, M.Idham Analisis Pendapatan Masyarakat Pengrajin Anyaman Bambu Di Desa Engkahan Kecamatan Sekayam Kabupaten Sanggau. Jurnal Hutan Lestari. Vol 6, No 4, pp. 814 – 825 ,2018. DOI: https://doi.org/10.26418/jhl.v6i4.29475.
Articles pp. 88 - 94

Analisis Performa Boiler Standard Kessel Berdasarkan Rasio Bahan Bakar dan Steam di PT. XYZ

Otong Jaelani, Ali Imron, Dibyo Setiawan, Edward Simanjuntak, Agus Subeno

doi 10.55679/pistonjt.v10i2.117

Views 62

Abstract PDF
References

Analisis Performa Boiler Standard Kessel Berdasarkan Rasio Bahan Bakar dan Steam di PT. XYZ

E. Simanjuntak, M. Idris, and Jufrizal, “Analisis Performa Boiler Berbahan Bakar Kombinasi Fiber Dan Cangkang Pada Boiler Takuma N-600 SA Analysis Of Boiler Performance Using Fiber And Shell Combinations In A Takuma,” IRA J. Tek. Mesin dan Apl., vol. 2, no. 1, pp. 34–42, 2023, doi: https://doi.org/10.56862/irajtma.v2i1.41.

I. Muzaki and A. Mursadin, “Analisis Efisiensi Boiler dengan Metode Input– Output di PT. Japfa Comfeed Indonesia Tbk. Unit Banjarmasin,” Sci. J. Mech. Eng. Kinemat., vol. 4, no. 1, pp. 37–46, 2019, doi: 10.20527/sjmekinematika.v4i1.50.

J. Syalsabila, Hendradinata, F. Putri, Safe’i, Siproni, and I. HB, “Anaslisa Efisiensi Thermal Boiler Tipe Circulation Fluidized BED Di PLTU 3x10MW,” Mach. J. Teknol. Terap., vol. 4, no. 3, pp. 159–166, 2023, doi: doi.org/10.5281/zenodo.10122406.

S. Kurapa, A. Z. Syaiful, P. T. Kimia, F. Teknik, and U. Bosowa, “Desain Dan Kinerja Water Tube Boiler Untuk,” vol. 5, no. April, pp. 160–164, 2024, doi: https://doi.org/10.35965/saintis.v5i1.581.

M. Fasola Putra, S. Wijayanto, and N. A. Pambudi, “Analisis Energi terhadap Performa Boiler Tipe Fluidized Bed Combustion,” J. Mek. dan Sist. Termal, vol. 1, no. 3, pp. 77–82, 2016, [Online]. Available: https://e-journal.janabadra.ac.id/index.php/JMST/article/view/PUTRA

R. Djafar, “Analisis Termal Pada Boiler PLTU XYZ Menggunakan Metode Langsung Berdasarkan Data Operasi Harian,” J. Teknol. Pertan. Gorontalo, vol. 10, no. 1, pp. 28–33, 2025, doi: 10.30869/jtpg.v10i1.1466.

M. Nasution and S. Napid, “Dalam Menentukan Efisiensi,” vol. 17, no. 3, pp. 314–319, 2022, doi: https://doi.org/10.30743/but.v17i3.5380.

Y. Mulyani, I. Dhamayanthie, M. Irfan Hilmi, and I. Teknologi Petroleum Balongan, “The Efficiency of Water Tube Boiler Performance Using Direct Method on the Utility Unit,” Riwayat Educ. J. Hist. Humanit., vol. 6, no. 4, pp. 3232–3238, 2023, doi: https://doi.org/10.24815/jr.v6i4.36824.

M. Sagaf, “Analisa faktor-faktor penyebab perubahan efisiensi boiler jenis pulverized coal fired forced circulation sub-critical pressure menggunakan metode tak langsung,” Teknoin, vol. 24, no. 2, pp. 147–158, 2018, doi: 10.20885/teknoin.vol24.iss2.art5.

N. Asminah, S. Nurkhopipah, and N. Nurya, “Efektivitas Economizer Pada Boiler Z-1101 A di PT X Indramayu,” J. Profesi Ins. Univ. Lampung, vol. 5, no. 2, pp. 55–59, 2024, doi: 10.23960/jpi.v5n2.130.

R. Hafis Ghifari, Nazaruddin, M. Nur, M. Isnaini Hadiyul Umam, and Suherman, “Performance Efficiency Analysis of Water Tube Boiler Machine Using Input Output Method and Fmea,” J. Perangkat Lunak, vol. 7, no. 1, pp. 32–44, 2025, doi: 10.32520/jupel.v7i1.3759.

M. F. Putra, D. S. Wijayanto, and N. A. Pambudi, “Analisis Performa Boiler Basuki Berdasarkan Rasio Antara Bahan Bakar dan Steam di PT. Indo Acidatama Tbk.,” NOZEL J. Pendidik. Tek. Mesin, vol. 01, no. 02, pp. 91–96, 2019, doi: https://doi.org/10.20961/nozel.v1i1.28272.

A. S. Wibowo, D. S. Wijayanto, and N. A. Pambudi, “Performa Boiler Alstom Berdasarkan Rasio Antara Bahan Bakar dan Steam di PT. Indo Acidatama Tbk.,” NOZEL J. Pendidik. Tek. Mesin, vol. 01, no. 03, pp. 274–280, 2019, doi: https://doi.org/10.20961/nozel.v2i3.42457.
Articles pp. 95 - 102

Analisis Uji Getaran Terhadap Kualitas Hasil Pengeboran Mesin Driling Knuth Type Kb 20 S

Halman, Roberth Ratlalan, Multhazam

doi 10.55679/pistonjt.v10i2.119

Views 117

Abstract PDF
References

Analisis Uji Getaran Terhadap Kualitas Hasil Pengeboran Mesin Driling Knuth Type Kb 20 S

Z. Li, Q. Meng, and S. Ma, "Intelligent monitoring system for drilling quality using real-time vibration signal analysis," IEEE Trans. Ind. Electron., vol. 70, no. 1, pp. 883-892, Jan. 2023.

A. S. Wani, G. S. Sagavkar, and V. K. Bhate, "Vibration analysis of drilling operation," Int. J. Stud. Res. Technol. Manage., vol. 1, no. 2, pp. 163-175, 2015.

[3] M. R. K. Z. I. Ahmad, and M. I. N. S. Bin Sulaiman, "Identification and evaluation of vibration sources from experiments on laboratory drilling equipment," Machines (MDPI), vol. 13, no. 12, p. 1076, Nov. 2025.

Aamir, M., Giasin, K., Tolouei-Rad, M., Ud Din, I., Hanif, M. I., Kuklu, U., & Ikhlaq, M. (2021). Effect of cutting parameters and tool geometry on the performance analysis of one-shot drilling process of AA2024-T3. Metals, 11(6), 854.

Indah, dkk, “Analisis Uji Getaran Pada Mesin Bor Duduk Ryu Rbd16, Jurnal Teknik Mesin: Vol. 13, No. 1, Februari 2024.

Aamer Sharif, dkk, “Experimental investigation of hole quality and chip analysis during the dry drilling process of Al6061-T6, Jurnal Of Material and Manufactring hal 21-30, 2023.

Faraditha Amelia dkk, Alat Pencacah Pakan Ternak Menggunakan Motor Universal, PISTON: Jurnal Teknologi, Vol. 07, (01) Juni2022, hal. 41–45.

N. Endriatno and L. O. A. Barata, “Rancangan Mesin Pengayak Pasir dengan Konversi Sistem Gerak Rotasi menjadi Translasi”, Piston-JT, vol. 8, no. 1, pp. 23–29, Jun. 2023.

M. Ubartas, dkk, “Experimental investigation of vibrational drilling”, ISSN 1392 - 1207. MECHANIKA. 2011. 17(4): 368-373.

Roberth M. Ratlalan, “ The Effect of Variation of Drilling Machine Rotation Type KB 20 S On ST-40 Material, Jurnal sains dan Terapan, vol. 3, no.1, 48-54, 2025.

Roberth M. Ratlalan. Variasi Kecepatan Putaran Dan Kedalaman Gaya Potong Mesin Bubut Gedee Weiler LZ 330 G Terhadap Permukaan Baja Karbon ST 37. Jurnal Rekayasa Mesin. Vol 14. Hal. 113 – 120. (2019).

Roberth M. Ratlalan, Odilia Valentine. Pengaruh Putaran Spindle Speed Terhadap Keausan Pahat Carbide Pada Proses Pembubutan Baja ST37. Journal Otopro. Hal. 60 – 64. (2024)

Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G. M., & Prakash, C. (2018). Evaluating hole quality in drilling of Al 6061 alloys. Materials, 11(12), 2443.
Articles pp. 103 - 112

Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

M Faizur Rijal Azhad, Parman, Immanuel Fredy Augustino, Rahmat Basya Shahrys Tsany, Dicki Nizar Zulfika

doi 10.55679/pistonjt.v10i2.118

Views 99

Abstract PDF
References

Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

H. I. Kim, J. Shon, and K. Lee, “A study of fuel economy and exhaust emission according to engine coolant and oil temperature,” Journal of Thermal Science and Technology, vol. 8, no. 1, pp. 255–268, 2013, doi: 10.1299/jtst.8.255.

K. Holmberg and A. Erdemir, “Influence of tribology on global energy consumption, costs and emissions,” Sep. 01, 2017, Tsinghua University Press. doi: 10.1007/s40544-017-0183-5.

K. Holmberg and A. Erdemir, “The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars,” Tribol Int, vol. 135, pp. 389–396, Jul. 2019, doi: 10.1016/j.triboint.2019.03.024.

J. Luo and X. Zhou, “Superlubricitive engineering—Future industry nearly getting rid of wear and frictional energy consumption,” Aug. 01, 2020, Tsinghua University Press. doi: 10.1007/s40544-020-0393-0.

G. Vaitkunaite, C. Espejo, B. Thiebaut, A. Neville, and A. Morina, “Low friction tribofilm formation and distribution on an engine cylinder tested with MoDTC-containing low viscosity engine lubricants,” Tribol Int, vol. 171, p. 107551, Jul. 2022, doi: 10.1016/j.triboint.2022.107551.

L. Guan, X. L. Feng, G. Xiong, and J. A. Xie, “Application of dielectric spectroscopy for engine lubricating oil degradation monitoring,” Sens Actuators A Phys, vol. 168, no. 1, pp. 22–29, Jul. 2011, doi: 10.1016/j.sna.2011.03.033.

Theo. Mang and Wilfried. Dresel, Lubricants and lubrication. Wiley-VCH, 2007.

M. S. Charoo and M. F. Wani, “Tribology in Industry Tribological Properties of IF-MoS 2 Nanoparticles as Lubricant Additive on Cylinder Liner and Piston Ring Tribo-pair,” 2016. [Online]. Available: www.tribology.fink.rs

W. Ahmed Abdalglil Mustafa, F. Dassenoy, M. Sarno, and A. Senatore, “A review on potentials and challenges of nanolubricants as promising lubricants for electric vehicles,” Lubrication Science, vol. 34, no. 1, pp. 1–29, Jan. 2022, doi: 10.1002/ls.1568.

A. Devaraj, M. Nagappan, D. Yogaraj, O. Prakash, Y. A. Rao, and A. Sharma, “Influence of nano-additives on engine behaviour using diesel-biodiesel blend,” Mater Today Proc, Apr. 2022, doi: 10.1016/j.matpr.2022.03.598.

J. Zhao, Y. Huang, Y. He, and Y. Shi, “Nanolubricant additives: A review,” Oct. 01, 2021, Tsinghua University. doi: 10.1007/s40544-020-0450-8.

P. Gangwani, M. K. Gupta, and J. Bijwe, “Synergism between particles of PTFE and hBN to enhance the performance of oils,” Wear, vol. 384–385, pp. 169–177, 2017, doi: 10.1016/j.wear.2017.01.053.

A. v. Bondarev, A. Fraile, T. Polcar, and D. v. Shtansky, “Mechanisms of friction and wear reduction by h-BN nanosheet and spherical W nanoparticle additives to base oil: Experimental study and molecular dynamics simulation,” Tribol Int, vol. 151, Nov. 2020, doi: 10.1016/j.triboint.2020.106493.

M. I. H. C. Abdullah, M. F. bin Abdollah, H. Amiruddin, N. Tamaldin, and N. R. M. Nuri, “Optimization of tribological performance of hBN/AL2O3 nanoparticles as engine oil additives,” in Procedia Engineering, Elsevier Ltd, 2013, pp. 313–319. doi: 10.1016/j.proeng.2013.12.185.

S. Shahnazar, S. Bagheri, and S. B. Abd Hamid, “Enhancing lubricant properties by nanoparticle additives,” Jan. 30, 2016, Elsevier Ltd. doi: 10.1016/j.ijhydene.2015.12.040.

A. Kotia, K. Chowdary, I. Srivastava, S. K. Ghosh, and M. K. A. Ali, “Carbon nanomaterials as friction modifiers in automotive engines: Recent progress and perspectives,” Jul. 15, 2020, Elsevier B.V. doi: 10.1016/j.molliq.2020.113200.

A. Tomala et al., “Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions,” Tribol Int, vol. 129, pp. 137–150, Jan. 2019, doi: 10.1016/j.triboint.2018.08.005.

S. Shahnazar, S. Bagheri, and S. B. Abd Hamid, “Enhancing lubricant properties by nanoparticle additives,” Int J Hydrogen Energy, vol. 41, no. 4, pp. 3153–3170, Jan. 2016, doi: 10.1016/j.ijhydene.2015.12.040.

W. Dai, B. Kheireddin, H. Gao, and H. Liang, “Roles of nanoparticles in oil lubrication,” Tribol Int, vol. 102, pp. 88–98, Oct. 2016, doi: 10.1016/j.triboint.2016.05.020.

O. Tevet, P. Von-Huth, R. Popovitz-Biro, R. Rosentsveig, H. D. Wagner, and R. Tenne, “Friction mechanism of individual multilayered nanoparticles,” Proceedings of the National Academy of Sciences, vol. 108, no. 50, pp. 19901–19906, Dec. 2011, doi: 10.1073/pnas.1106553108.

M. Kalin, J. Kogovšek, and M. Remškar, “Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives,” Wear, vol. 280–281, pp. 36–45, Mar. 2012, doi: 10.1016/j.wear.2012.01.011.

C. Kumara, D. N. Leonard, H. M. Meyer, H. Luo, B. L. Armstrong, and J. Qu, “Palladium Nanoparticle-Enabled Ultrathick Tribofilm with Unique Composition,” ACS Appl Mater Interfaces, vol. 10, no. 37, pp. 31804–31812, Sep. 2018, doi: 10.1021/acsami.8b11213.

S. Zhang, L. Hu, D. Feng, and H. Wang, “Anti-wear and friction-reduction mechanism of Sn and Fe nanoparticles as additives of multialkylated cyclopentanes under vacuum condition,” Vacuum, vol. 87, pp. 75–80, Jan. 2013, doi: 10.1016/j.vacuum.2012.07.009.

J. Padgurskas, R. Rukuiza, I. Prosyčevas, and R. Kreivaitis, “Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles,” Tribol Int, vol. 60, pp. 224–232, Apr. 2013, doi: 10.1016/j.triboint.2012.10.024.

J. M. Liñeira del Río, E. R. López, and J. Fernández, “Synergy between boron nitride or graphene nanoplatelets and tri(butyl)ethylphosphonium diethylphosphate ionic liquid as lubricant additives of triisotridecyltrimellitate oil,” J Mol Liq, vol. 301, p. 112442, Mar. 2020, doi: 10.1016/j.molliq.2020.112442.

J. M. Liñeira del Río, E. R. López, and J. Fernández, “Tribological properties of graphene nanoplatelets or boron nitride nanoparticles as additives of a polyalphaolefin base oil,” J Mol Liq, vol. 333, Jul. 2021, doi: 10.1016/j.molliq.2021.115911.

O. N. Çelik, N. Ay, and Y. Göncü, “Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel,” Particulate Science and Technology, vol. 31, no. 5, pp. 501–506, Sep. 2013, doi: 10.1080/02726351.2013.779336.

Y. Wang, Z. Wan, L. Lu, Z. Zhang, and Y. Tang, “Friction and wear mechanisms of castor oil with addition of hexagonal boron nitride nanoparticles,” Tribol Int, vol. 124, pp. 10–22, Aug. 2018, doi: 10.1016/j.triboint.2018.03.035.

H. Baş and Y. E. Karabacak, “Investigation of the Effects of Boron Additives on the Performance of Engine Oil,” Tribology Transactions, vol. 57, no. 4, pp. 740–748, Jul. 2014, doi: 10.1080/10402004.2014.909549.

T. Akbiyik, N. Kahraman, and T. Taner, “Investigation of the effect of boron additive to lubricating oil on engine performance, exhaust, and emissions,” Fuel, vol. 312, Mar. 2022, doi: 10.1016/j.fuel.2021.122931.

M. Ilman Hakimi Chua Abdullah, M. Fadzli Bin Abdollah, H. Amiruddin, N. Tamaldin, N. Rashid Mat Nuri, and A. Rafeq Saleman, “The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine,” Journal of Mechanical Engineering, vol. 1, no. 1, pp. 103–112, 2017.

N. Thachnatharen, M. Khalid, A. Arulraj, and N. Sridewi, “Tribological performance of hexagonal boron nitride (hBN) as nano-additives in military grade diesel engine oil,” in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 70–73. doi: 10.1016/j.matpr.2021.04.145.

N. Nomède-Martyr, M. Vitulin, H. Joseph, and P. Thomas, “Moringa oil with graphite and hexagonal boron nitride particles as additives for lubrication,” Diam Relat Mater, vol. 124, Apr. 2022, doi: 10.1016/j.diamond.2022.108930.

Q. Wan, Y. Jin, P. Sun, and Y. Ding, “Tribological behaviour of a lubricant oil containing boron nitride nanoparticles,” in Procedia Engineering, Elsevier Ltd, 2015, pp. 1038–1045. doi: 10.1016/j.proeng.2015.01.226.

S. Senyk, A. Chodkiewicz, K. Gocman, B. Szczęśniak, and T. Kałdoński, “Hexagonal Nano and Micro Boron Nitride: Properties and Lubrication Applications,” Materials, vol. 15, no. 3, Feb. 2022, doi: 10.3390/ma15030955.

Yanmar, “Yanmar TF Series.” Accessed: Dec. 30, 2022. [Online]. Available: https://www.yanmar.com/en_id/engine/products/diesel/h_watercooled/tfseries/

Y. Ali and M. A. Hanna, “Durability Testing of A Diesel Fuel, Methyl Tallowate, And Ethanol Blend In a Cummins N14-410 Diesel Engine,” Transactions of the ASAE, vol. Vol. 39(3), pp. 793–797, 1996.

C. L. Peterson, J. C. Thompson, and J. S. Taberski, “One-Thousand-Hour Engine Durability Test With Hysee And Using A 5x-EMA Test Cycle,” Transactions of the ASAE, vol. VOL. 42(1), pp. 23–30, 1999.

S. Sae, M. Ziejewski, H. J. Goettler, H. Haines, and C. Huang, “EMA Durability Tests on High Oleic Sunflower and Safflower Oils in Diesel Engines,” 2018.

A. Z. M. Fathallah and F. Pinto, “The Influence of NaCl dissolved on biodiesel of used cooking oil on performance and its degradation of main components of diesel engine,” IOP Conf Ser Earth Environ Sci, vol. 972, no. 1, p. 012030, Jan. 2022, doi: 10.1088/1755-1315/972/1/012030.

K. Nantha Gopal and R. Thundil Karuppa Raj, “Effect of pongamia oil methyl ester-diesel blend on lubricating oil degradation of di compression ignition engine,” Fuel, vol. 165, pp. 105–114, Feb. 2016, doi: 10.1016/j.fuel.2015.10.031.

J. S. Evans, “Where Does All That Metal Come From?,” WearCheck Technical Bulletin Issue 47, 2010.

A. Kotia, S. Borkakoti, and S. K. Ghosh, “Wear and performance analysis of a 4-stroke diesel engine employing nanolubricants,” Particuology, vol. 37, pp. 54–63, Apr. 2018, doi: 10.1016/j.partic.2017.05.016.

Yanmar, Yanmar Service Manual: TF Series. Tokyo. Accessed: Dec. 30, 2022. [Online]. Available: https://www.yanmar.com/media/id/com/maintenance/catalog/100495.pdf

Bureau for Chemical Substances, “ CLH Report For Boric Acid,” Lodz, Poland, 2013.

M. Waqas, R. Zahid, M. U. Bhutta, Z. A. Khan, and A. Saeed, “A review of friction performance of lubricants with nano additives,” Nov. 01, 2021, MDPI. doi: 10.3390/ma14216310.
Articles pp. 112 - 122

Rancang Bangun Alat Pengiris Tempe Dengan Menggunakan Penggerak Motor Listrik

Sudarsono, Samhuddin, La Ode Ahmad Barata, Muhamad Laskar Wahid, Urzunil Kadim, Zulkifli Ananda

doi 10.55679/pistonjt.v10i2.124

Views 87

Abstract PDF
References

Rancang Bangun Alat Pengiris Tempe Dengan Menggunakan Penggerak Motor Listrik

Sutardi, S. (2014). Tempe: Makanan Tradisional Kaya Nutrisi. Bandung: AgroMedia

Astari, D. (2019). Kandungan Gizi Tempe dan Manfaatnya Bagi Kesehatan. Jakarta: Pustaka Nutrisi.

Fitria, N. (2010). Studi Efisiensi Alat Pemotong Tempe pada Industri Rumah Tangga. Jurnal Teknologi dan Industri, 7(1), 12–18.

R. A. Himarosa, S. Sudarisman, A. Bisandyaloka, and F. Sofyantoro, “Pengembangan Unit Usaha Tempe melalui Aplikasi Mesin Giling Kedelai Teknologi Screw,” J. Pengabdi. Pada Masy., vol. 7, no. 2, pp. 298–307, 2022, doi: 10.30653/002.202272.72.

S. A. Muttalib, A. F. Hidayat, and A. Priyati, “Rancang Bangun Hopper Out Put Campuran Ragi Tempe Dengan Kedelai,” J. Ilm. Rekayasa Pertan. dan Biosist., vol. 7, no. 1, pp. 17–23, 2019, doi: 10.29303/jrpb.v7i1.99.

H. Hariri, M. Al Fathar, and I. Bachtiar, “Rancang bangun mesin pengiris tempe otomatis,” SINTEK J. J. Ilm. Tek. Mesin, vol. 16, no. 1, p. 30, 2022, doi: 10.24853/sintek.16.1.30-40.

B. M. T. Pakpahan et al., Elemen Mesin Untuk Elemen Mesin Untuk Teknik Industri Teknik Industri, Pertama., no. Desember. GET PRESS INDONESIA, 2023.

S. D. Yulianto, M. Ivanto, and M. Taufiqurrahman, “Rancang Bangun Mesin Perajang Keripik Tempe Dengan Mekanisme,” Teknol. Rekayasa Tek. Mesin, vol. 6, no. 1, pp. 8–14, 2025.

R. A. Himarosa, S. Sudarisman, A. Bisandyaloka, and F. Sofyantoro, “Pengembangan Unit Usaha Tempe melalui Aplikasi Mesin Giling Kedelai Teknologi Screw,” J. Pengabdi. Pada Masy., vol. 7, no. 2, pp. 298–307, 2022, doi: 10.30653/002.202272.72.

A. Saidah and A. Farudin, “Analisa Kinerja Mesin Pengiris Tempe Menggunakan Motor Penggerak 0,5 Hp Dengan Sistem Pendorong Otomatis,” J. Tek. Teknol. Terap., vol. 1, no. 1, pp. 31–35, 2023, doi: 10.47970/jttt.v1i1.431.
Articles pp. 123 - 131

Rekayasa Material Serat Alternatif Melalui Desain Mesin Pengurai Sabut Kelapa

Nanang Endriatno

doi 10.55679/pistonjt.v10i2.126

Views 79

Abstract PDF
References

Rekayasa Material Serat Alternatif Melalui Desain Mesin Pengurai Sabut Kelapa

B. Indonesia, “BPS 2024.” [Online]. Available: https://www.bps.go.id/id/statistics-table/2/MTMyIzI=/produksi-tanaman-perkebunan.html

N. Endriatno, “Review of Characteristics and Mechanical Properties of Coconut Fiber as Reinforcement in Polymer Matrix Composites,” vol. 01, no. 02, 2024.

M. A. Hidalgo-Salazar, J. P. Correa-Aguirre, S. García-Navarro, and L. Roca-Blay, “Injection molding of coir coconut fiber reinforced polyolefin blends: Mechanical, viscoelastic, thermal behavior and three-dimensional microscopy study,” Polymers (Basel)., vol. 12, no. 7, pp. 1–20, 2020, doi: 10.3390/polym12071507.

R. Damian, N. Bifel, E. U. K. Maliwemu, D. G. H. Adoe, and J. T. Mesin, “Pengaruh Perlakuan Alkali Serat Sabut Kelapa terhadap Kekuatan Tarik Komposit Polyester,” LONTAR J. Tek. Mesin Undana, vol. 2, no. 1, pp. 61–68, 2015, [Online]. Available: https://ejurnal.undana.ac.id/index.php/LJTMU/article/view/489

S. M, J. J, D. Azis, and A. Haslinah, “Pengaruh Fraksi Volume Komposit Serat Sabut Kelapa Bermatrik Polimer Termoseting Polyester Terhadap Kekuatan Lentur,” ILTEK J. Teknol., vol. 17, no. 1, pp. 15–19, 2022, doi: 10.47398/iltek.v17i1.703.

Y. Fakhrud, B. Asngali, and A. Wennas, “Studi Karakteristik Komposit Serat Kelapa Terhadap Waktu Perendaman H2so4 dengan Matrik Epoxy Untuk Pembuatan Komponen Kendaraan,” vol. 6, no. 1, pp. 2019–2021, 2021.

D. L. Rizki, Ramadhan, “Pengaruh Variasi Panjang Serat Sabut Kelapa Bermatrik Plastik Recycled High Density Polyethylene (rHDPE) Terhadap Kekuatan Lentur Komposit,” 2023.

W. Apriani and I. F. B. N, “Uji Performansi pada Mesin Pengurai Sabut Kelapa dengan Modifikasi Pisau Pengurai,” vol. 6, no. 2, pp. 57–63, 2022.

H. Priono et al., “Desain Pencacah Serabut Kelapa Dengan Penggerak Motor,” J. Engine, vol. 3, no. 1, 2019.

J. S. Bale, “Material Komposit Polimer Berpenguat Serat,” 2022.

S. Harish, D. P. Michael, A. Bensely, D. M. Lal, and A. Rajadurai, “Mechanical property evaluation of natural fiber coir composite,” Mater. Charact., vol. 60, no. 1, pp. 44–49, 2009, doi: 10.1016/j.matchar.2008.07.001.

E. Vélez et al., “Coconut-Fiber Composite Concrete: Assessment of Mechanical Performance and Environmental Benefits,” Fibers, vol. 10, no. 11, pp. 1–12, 2022, doi: 10.3390/fib10110096.

R. S. Khurmi and J. K. Gupta, “A Textbook of Machine Design. Ram Nagar: Eurasia Publishing House (PVT),” Engg. Serv., no. I, pp. 1–200, 2005.

R. S. KHURMI and J. K. GUPTA, “Handbook of Machinery Dynamics,” Handb. Mach. Dyn., no. 1, pp. 11–28, 2000.

Khurmi and Gupta, “A Textbook of Machine Design,” no. 1, pp. 11–28, 2005, doi: 10.1038/042171a0.

Sularso., Dasar Perencanaan Dan Pemilihan Elemen Mesin. Jakarta: PT. Pradnya Paramita, 2002.

N. Endriatno et al., “Pengenalan Mesin Pencacah Untuk Membantu Petani Nilam Di Desa Aoma Kecamatan Wolasi Kabupaten Konawe Selatan,” Jurnal Pengabdian Masyarakat Ilmu Terapan, vol. 5, no. 2. pp. 141–147, 2023.

N. Endriatno, L. O. A. Barata, and Salimin, “Analisis Kekuatan Rangka Mesin Pencacah Nilam dengan Menggunakan Metode Elemen Hingga”, Piston-JT, vol. 9, no. 2, pp. 56–64, Dec. 2024.

F. Prananda, R. Balaka, and N. Endriatno, “Analisis Perancangan Alat Pencacah Nilam Untuk Petani Nilam,” Enthalpy J. Ilm. Mhs. Tek. Mesin, vol. 9, no. 1, p. 13, 2024, doi: 10.55679/enthalpy.v9i1.46935.

A. Gafur and A. Muklis, “Rancang Bangun Mesin Pengurai Sabut Kelapa Menjadi Cocopeat Dan Cocofiber,” J. Din. Vokasional Tek. Mesin, vol. 7, no. April, pp. 55–61, 2022.

“View of Sosialisasi dan Inovasi Mesin Pengurai Sabut Kelapa Guna Meningkatkan Kualitas dan Produktifitas Industri Sabut Kelapa di Desa Lamnga Kecamatan Mesjid Raya Aceh Besar.pdf.”

S. Subekti et al., “Pelatihan Pengoperasian Mesin Pengurai Sabut Kelapa Di RPTRA Menara Kelurahaan Kembangan Selatan Jakarta Barat,” vol. 3, no. 4, pp. 737–743, 2025.
Articles pp. 132 - 137

Optimasi Parametrik Minyak Pirolisis dan Karbon Sisa Hasil Pirolisis Ban Bekas dalam Reaktor Atmosfer Inert

Lukas Kano Mangalla, Agustinus Lolok, Samhuddin Samhuddin, La Ode Ahmad Barata

doi 10.55679/pistonjt.v10i2.129

Views 92

Abstract PDF
References

Optimasi Parametrik Minyak Pirolisis dan Karbon Sisa Hasil Pirolisis Ban Bekas dalam Reaktor Atmosfer Inert

WBCSD, “Global Tire Waste Management Report 2023. Geneva: World Business Council for Sustainable Development.” 2023.

T. Iskandar and A. C. K. Fitri, “Asap Cair dan Biochar hasil Proses Pyrolisis Sekam Padi dan Biomassa lainnya sebagai Income Generating Unit di Universitas Tribhuwana Tunggadewi,” JAST J. Apl. Sains dan Teknol., vol. 2, no. 2, pp. 81–87, 2018.

B. Tian, J. Wang, Y. Qiao, H. Huang, L. Xu, and Y. Tian, “Understanding the pyrolysis synergy of biomass and coal blends based on volatile release, kinetics and char structure,” Biomass and Bioenergy, vol. 168, p. 106687, Jan. 2023, doi: 10.1016/J.BIOMBIOE.2022.106687.

X. Li et al., “A Study on the Pyrolysis Behavior and Product Evolution of,” Catalysts, vol. 14, no. 200, pp. 1–20, 2024.

KLHK, “Statistik Pengelolaan Limbah Bahan Berbahaya dan Beracun 2022. Jakarta,Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia.” 2023.

B. Skariah and R. C. Gupta, “A comprehensive review on the applications of waste tire rubber in cement concrete,” Renew. Sustain. Energy Rev., vol. 54, pp. 1323–1333, 2016, doi: 10.1016/j.rser.2015.10.092.

M. Hashamfirooz and M. Hadi, “Heliyon A systematic review of the environmental and health effects of waste tires recycling,” Heliyon, vol. 11, no. 2, p. e41909, 2025, doi: 10.1016/j.heliyon.2025.e41909.

J. Pendidikan, M. Sains, and M. Pirolisis, “Perbandingan kualitas bahan bakar dari pengolahan sampah plastik menjadi bahan bakar minyak dengan metode pirolisis,” EduMatSains, vol. 6, no. 1, pp. 219–230, 2021.

R. T. Aziz et al., “BAHAN PRODUKSI GAS ASAP CAIR MELALUI METODE PIROLISIS,” vol. 5, no. 1, pp. 73–82, 2022.

J. P. Simanjuntak, R. Siahaan, and A. N. Putra, Teknologi Pirolisiis Biomassa-Energi Terbarukan. 2024.

Z. Cepic, V. Mihajlovic, S. Duric, M. Milotic, M. S. STepanov, and M. I. Micunovic, “Experimental Analysis of Temperature Influence on Waste Tire Pyrolysis,” Energies, vol. 14, no. 5403, 2021, doi: https://doi.org/10.3390/en14175403 1.

M. Pahnila, A. Koskela, P. Sulasalmi, and T. Fabritius, “A Review of Pyrolysis Technologies and the Effect of Process Parameters on Biocarbon Properties,” Energies, vol. 16, no. 6936, pp. 1–27, 2023.

K. Kumar and N. . Panwar, “Pyrolysis technologies for biochar production in waste management : a review,” Clean Energy, vol. 8, no. 4, pp. 61–78, 2024.

W. H. Chen, Naveen C, P. K. Ghodke, A. K. Sharma, and P. Bobde, “Co-pyrolysis of lignocellulosic biomass with other carbonaceous materials: A review on advance technologies, synergistic effect, and future prospectus,” Fuel, vol. 345, p. 128177, Aug. 2023, doi: 10.1016/J.FUEL.2023.128177.

R. Cherba, K. Wróblewski, and E. Molga, “PYROLYSIS OF WASTE TYRES – THE EFFECT OF REACTION,” Chem. Process Eng., vol. 38, no. 3, pp. 363–377, 2017, doi: 10.1515/cpe-2017-0028.

PISTON: Jurnal Teknologi

Vol. 10 No. 2 (2025): Desember 2025

Rancang Bangun Mesin Perajang Singkong Menggunakan Tenaga Penggerak Motor Listrik

Rancang Bangun Mesin Penggiling Daging dengan Tenaga Penggerak Motor Listrik

Pemodelan Maket Menara Conventional Land Rig Sebagai Penerapan Project Based Learning Dalam Peralatan Pemboran dan Produksi

Analisis Performa Boiler Standard Kessel Berdasarkan Rasio Bahan Bakar dan Steam di PT. XYZ

Analisis Uji Getaran Terhadap Kualitas Hasil Pengeboran Mesin Driling Knuth Type Kb 20 S

Pengaruh Aditif Pelumas Hexagonal Boron Nitride terhadap Keausan Mesin Diesel B30 dalam Uji Durabilitas 200 Jam

Rancang Bangun Alat Pengiris Tempe Dengan Menggunakan Penggerak Motor Listrik

Rekayasa Material Serat Alternatif Melalui Desain Mesin Pengurai Sabut Kelapa

Optimasi Parametrik Minyak Pirolisis dan Karbon Sisa Hasil Pirolisis Ban Bekas dalam Reaktor Atmosfer Inert

Google Scholar Citation

Analisa Keselamatan dan Kesehatan Kerja Pada Pengoperasian Forklift di PT.Equiport Inti Indonesia

Dispenser Otomatis Berbasis Arduino Uno

Perancangan Pembuatan Kapal Tenaga Surya Skala Miniatur

Sistem Pendingin Pada Induced Draft Counter flow Cooling Tower

Rancangan Mesin Pengayak Pasir dengan Konversi Sistem Gerak Rotasi menjadi Translasi

Announcements

CALL FOR PAPER

Main Menu

template

TOOLS

ABSTRACTING AND INDEXING

visitors

bkstm

Keywords

ISSN