PISTON: Jurnal Teknologi

p-ISSN: 2988-0408 e-ISSN: 2502-7018 SINTA 5

PISTON: Jurnal Teknologi (PISTON-JT) is a peer-reviewed open access journal that provides a forum for the publication and dissemination of scholarly work in the field of engineering and technology. Managed and published by the Department of Mechanical Engineering, Faculty of Engineering, Universitas Halu Oleo, PISTON-JT aims to contribute to the advancement of science and technology by publishing original and high-quality articles.

The journal covers a broad spectrum of topics in engineering and applied technology. PISTON-JT also welcomes submissions from related natural sciences disciplines—such as applied physics, chemistry, mathematics, environmental sciences, etc.—that demonstrate strong relevance or applications in technology and engineering. Interdisciplinary research bridging science and engineering is particularly encouraged, reflecting the journal’s commitment to technological innovation grounded in scientific understanding. PISTON-JT is published twice a year, with regular issues released in June and December. The journal is committed to maintaining a timely and consistent publishing schedule to support the dissemination of current and impactful research.

To ensure academic rigor and maintain the quality of published articles, PISTON-JT applies a single-blind peer review process. In this model, reviewers remain anonymous to the authors, while the authors’ identities are known to the reviewers. Each submission first undergoes an editorial screening for relevance, completeness, and adherence to author guidelines. Manuscripts deemed suitable are then reviewed by at least two independent reviewers who evaluate the work based on its originality, clarity, methodological soundness, and contribution to the field. Editorial decisions are made based on reviewers' recommendations. Please unsure that maximum acceptable similarity index is 25%, excluding references and citations. Manuscripts exceeding this threshold or found to violate ethical standards will be immediately rejected. Authors are expected to ensure that their work is original and appropriately cited.

By offering an open access platform, PISTON-JT ensures that all content is freely available to readers and researchers worldwide, fostering the global exchange of knowledge in science and engineering. The journal welcomes contributions from academics, researchers, and practitioners from across disciplines whose work aligns with its scope.

LINK SEMENTERA TEMPLATE JURNAL TERBARU

https://bit.ly/46F7mkb

Chief Editor: Dr. Eng. La Ode Ahmad Barata

Jurusan Teknik Mesin UHO

License: CC BY

Editorial Board

2 Week First Decision

2 Weeks Review Speed

74% Acceptance Rate

71 Total Articles

Vol. 11 No. 1 (2026): June 2026

Article in this Issue : : 10 — Authors : : 33

Published: 2026-05-11

DOI: 10.55679/pistonjt.v11i1

Articles pp. 1 - 8

Rancang Bangun Mesin Pemotong Rumput Berbasis Sistem Kontrol

Mazwan Mazwan, Ari Kurniawan, Ahmad Fauzi Pohan, Kholis Gunawan

doi 10.55679/pistonjt.v11i1.132

Views 0

Abstract PDF
References

Rancang Bangun Mesin Pemotong Rumput Berbasis Sistem Kontrol

Dedi Irawan dan Endah Fitriani, “Rancang Robot Pemotong Rumput Otomatis Berbasis Arduino Uno Dengan Sistem Kendali Aplikasi Blynk,” J. Ampere, vol. 6, no. 2, hal. 65–74, 2021.

S. Darmanto, G. Hanif, Y. Suryana, dan J. A. F, “Modifikasi Mesin Potong Rumput Model Gendong untuk Pemotong Pelepah Sawit,” vol. 22, no. 4, hal. 242–245, 2020.

D. Rahmanda, A. Azis, dan Y. Irwansi, “Perancangan Penggerak Pada Robot Pemotong Rumput,” Elektrika, vol. 15, no. 2, hal. 105, 2023, doi: 10.26623/elektrika.v15i2.8017.

S. Une, S. Akuba, dan B. Liputo, “Rancang Bangun Mesin Penggembur Tanah Menggunakan Mesin Pemotong Rumput,” vol. 6, no. November 2021, hal. 52–56.

K. Leelakar dan S. Krishnaraj, “Design and Fabrication of Body Framing and Chassis Development of Electrical Vehicle ( ATV ) With Simulation Analysis Design and Fabrication of Body Framing and Chassis Development of Electrical Vehicle ( ATV ) With Simulation Analysis,” J. Phys. Conf. Ser., hal. 1–13, 2021, doi: 10.1088/1742-6596/1964/6/062095.

S. P. Sutisna, E. Sutoyo, dan D. N. Pariatiara, “Rancang Bangun Pisau Robot Pemotong Rumput,” AME (Aplikasi Mek. dan Energi) J. Ilm. Tek. Mesin, vol. 6, no. 1, hal. 18, 2020, doi: 10.32832/ame.v6i1.2817.

Y. Yusman, W. Mellyssa, S. Salahuddin, K. Mukhlisin, dan S. Mualla, “Rancang Bangun Robot Pemotong Rumput Secara Otomatis dengan Kontrol,” Junal Infomedia Tek. Inform. Multimed. Jar., vol. 8, no. 2, hal. 100–105, 2023.

I. S. Perdana dan M. P. N. Sirodz, “Rancang Bangun Sistem Roda Track Pada Kendaraan Penyemprot Hama Otomatis,” e-Proceeding FTI, hal. 1–13, 2021, [Daring]. Tersedia pada: https://eproceeding.itenas.ac.id/index.php/fti/article/view/693%0Ahttps://eproceeding.itenas.ac.id/index.php/fti/article/download/693/574

M. Idzani dan S. Ihsan, “Rancang Bangun Mesin Pemotong Rumput Berbahan Bakar Gas,” vol. 4, no. June, hal. 2016, 2016.

M. Mulyadi, D. Wahyudi, A. Hidayat, dan M. A. Chandra, “Modifikasi Mesin Pemotong Rumput Jadi Mesin Tempel,” hal. 24–32, 2022, [Daring]. Tersedia pada: http://repository.pnb.ac.id/id/eprint/3201

Sofian Efendi, Mijer, Aditia Warman, Sarlan, and Budiman Sudia, “Perancangan Mesin Pencacah Rumput Pakan Ternak Menggunakan Sistem Penggerak Motor Listrik ”, Piston-JT, vol. 9, no. 1, pp. 15–23, Jul. 2024.

N. Endriatno, L. O. A. Barata, and Salimin, “Analisis Kekuatan Rangka Mesin Pencacah Nilam dengan Menggunakan Metode Elemen Hingga”, Piston-JT, vol. 9, no. 2, pp. 56–64, Dec. 2024.

M. Mazwan, S. D. Utama, dan Y. Agussationo, “Rancang Bangun Mesin Pengaduk Adonan Roti,” TURBO, vol. 13, no. 2, hal. 447–456, 2024, doi: https://doi.org/10.24127/trb.v13i2.3745.
Articles pp. 09 - 18

Pengujian Mekanik (Kekerasan dan Impact) Logam Ferro Valve Plat Double Dampers yang Digunakan Sebagai Penyaring Abu Boiler

Herry Darmadi, Arie Erza Erlangga Zebua, Nurul Shadrina Bintang, Agustin Nurya Savitri, Sorta Lumbantoruan

doi 10.55679/pistonjt.v11i1.134

Views 0

Abstract PDF
References

Pengujian Mekanik (Kekerasan dan Impact) Logam Ferro Valve Plat Double Dampers yang Digunakan Sebagai Penyaring Abu Boiler

Faisal, Muhammad, & Asrul, A. (2022). Analisa Analisa Kelelahan Dan Kekerasan Pada Logam Axle shaft Dengan Pengelasan Gesek. Jurnal Teknik Mesin, 15(2), 159 - 165. https://doi.org/10.30630/jtm.15.2.964

Muhammad Firmansyah, F.. Sitorus, M. Hutagalung, and A. A. Sitinjak, “Perbandingan Pendinginan Annealing Dan Normalizing Pada Peleburan Logam Ferro Untuk Membuat Baffle Plate Terhadap Nilai Kekuatan Dan Kekerasan Melalui Metode Three Point Bending Dan Rockwell Hardness”, J-Milo, vol. 2, no. 2, pp. 81–99, Feb. 2026.

S. Faiz and F. Yuamita, “Identifikasi Potensi Bahaya pada Area Peleburan Logam Menggunakan Metode Hazard Identification Risk Assesment And Risk Control (HIRARC) dan Fault Tree Analysis (FTA) di CV. Barokah Logam Sejahtera”, JIM, vol. 2, no. 8, pp. 3652–3662, Jul. 2023.

R. B. Widiantoro and Y. R. Fauzi, “Analisis Komparatif Metode Pengujian Kekerasan: Rockwell Dan Vickers Pada Heat-Treated High-Speed Steel (Baja Kecepatan Tinggi Yang Diolah Panas)”, SNPPM, vol. 8, pp. 67–71, Dec. 2024, doi: 10.33019/snppm.v8i0.6004.

Nur N. Hakim, “Analisa Perbandingan Uji Hardness Material Fiberglass Berdasarkan Perlakuan Suhu Pada Proses Pembuatannya”, justicb, vol. 5, no. 2, pp. 243–250, Feb. 2025.

S. A. Yudistirani, K. H. Mahmud, and E. Diniardi, “Analisis Kekerasan Pada Outer Ring Dan Inner Ring Hasil Proses Heat Treatment”, JurTek: Jurnal Teknologi, vol. 10, no. 1, pp. 83–88, Jan. 2018.

A. T. Wahyudiyanto, A. Akbar “Analisa Perbandingan Hasil Pengujian Pada Alat Uji Impact Kapasitas 100 Joule Dengan Berbagai Perlakuan Panas”, inotek, vol. 9, no. 3, pp. 2391–2398, Jul. 2025, doi: 10.29407/qf64hv63.

N. Erwanto, S. N. S. Sidabutar, and B. Maryanti, “Analisis Perbandingan Kekuatan Impak Material Baja ASTM A 36 dengan Perlakuan Normalized dan Unnormalized pada Suhu Normal Dan (-20C),” Jurnal Ilmiah Teknik Mesin, vol. 7, no. 2, pp. 75–83, Nov. 2022, doi: http://dx.doi.org/10.31602/al-jazari.v7i2.7039.

Affandi, A. R. Nasution, I. Tanjung, and A. M. Siregar, “Pengaruh Annealing Baja St 37 Terhadap Kekerasan Dan Kekuatan Tarik,” Jurnal Rekayasa Material, Manufaktur dan Energi, vol. 5, no. 2, pp. 194–199, Sep. 2022, Accessed: Dec. 20, 2024. https://doi.org/10.30596/rmme.v5i2.11796

F. Ikramullah, F. Safriwardy, S. Suryadi, R. Putra, and F. Faisal, “Analisis Uji Impact dan Uji Bending Balok Laminasi Batang Kelapa (Cocos Nucifera) dan Bambu Duri (Bambusa Blumeana) Sebagai Material Konstruksi Lunas Kapal Kayu”, MJMST, vol. 8, no. 2, pp. 252–262, Oct. 2024.

E. C. Sitepu, Anna Angela Sitinjak, N. A. Sidabutar, Diman Raymond S. Tambunan, Dinda Rizka Fadhillah, and Isnaini Ahmadi, “Dampak Pengaturan Exhaust Damper terhadap Karakteristik Uap HP Drum HRSG pada Operasi PLTGU”, J-Milo, vol. 3, no. 1, pp. 159–167, Feb. 2026.
Articles pp. 19 - 26

Studi eksperimen prestasi termoelektrik sebagai pemanen energi listrik mikro: efek gradien temperatur dan konfigurasi modul

La Ode Ahmad Barata

doi 10.55679/pistonjt.v11i1.136

Views 0

Abstract PDF
References

Studi eksperimen prestasi termoelektrik sebagai pemanen energi listrik mikro: efek gradien temperatur dan konfigurasi modul

Y. Zhao et al., “A review of heat pipe thermoelectric generators: principles, applications, and challenges,” Sol. energi, vol. 300, no. March, p. 113850, 2025, doi: 10.1016/j.solener.2025.113850.

X. Cui, Y. Wu, and X. Chen, “Thermoelectric generation: principles, applications, and prospects,” Renew. Sustain. energi Rev., vol. 224, no. July, p. 116081, 2025, doi: 10.1016/j.rser.2025.116081.

M. Ridwan, M. Gasulla, and F. Reverter, “Principle and Applications of Thermoelectric Generators: A Review,” Sensors, vol. 25, no. 8, 2025, doi: 10.3390/s25082484.

Y. Kimura, K. Utsumi, and H. Tohmyoh, “Experimental relationship between the Seebeck and Peltier effects in thermoelectric modules based on Fe and Al metals,” Appl. Therm. Eng., vol. 255, no. July, p. 124009, 2024, doi: 10.1016/j.applthermaleng.2024.124009.

R. Liu, Y. Ge, D. Wang, and Z. Shuai, “Understanding the Temperatur Dependence of the Seebeck Coefficient from First-Principles Band Structure Calculations for Organic Thermoelectric Materials,” CCS Chem., vol. 3, no. 10, pp. 1477–1483, 2021, doi: 10.31635/ccschem.021.202100813.

D. Beretta et al., “Thermoelectrics: From history, a window to the future,” Mater. Sci. Eng. R Reports, vol. 138, no. October, 2019, doi: 10.1016/j.mser.2018.09.001.

R. Sok and J. Kusaka, “Experimental and modeling analysis on thermoelectric heat recovery to maximize the performance of next-generation diesel engines dedicated for future electrified powertrains,” Appl. Therm. Eng., vol. 219, no. PB, p. 119530, 2023, doi: 10.1016/j.applthermaleng.2022.119530.

Y. Liu, Z. Shi, G. Wang, Y. Y. Yan, and Y. Zhang, “Experimental Investigation for a Novel Prototype of a Thermoelectric Power Generator With Heat Pipes,” Front. energi Res., vol. 9, no. September, pp. 1–13, 2021, doi: 10.3389/fenrg.2021.744366.

J. Lv et al., “Touch-activated information interaction system based on body-heat-powered flexible thermoelectric generator for food spoilage monitoring,” Nano energi, vol. 123, no. February, p. 109418, 2024, doi: 10.1016/j.nanoen.2024.109418.

A. Shukla, N. Tripathi, and D. T. Marx, “Oxide thermoelectrics: a review and a case study,” Dyn. Process. Solids, no. 0, pp. 137–152, 2023, doi: 10.1016/B978-0-12-818876-7.00006-4.

Y. A. Cengel, M. A. Boles, and M. Kanoglu, Thermodynamics: an engineering approach, Ninth. McGraw-Hill Education, 2019.

L. Chen, F. Sun, and C. Wu, “Thermoelectric-generator with linear phenomenological heat-transfer law,” Appl. energi, vol. 81, no. 4, pp. 358–364, 2005, doi: 10.1016/j.apenergi.2004.09.011.

F. A. Purnama Putra and B. Suprianto, “Solar Thermoelectric Generator Prototype with Flat Black Color Coating on Copper Plate Heat Absorber,” Ina. Indones. J. Electr. Eletronics Eng., vol. 8, no. 1, pp. 25–31, 2024, doi: 10.26740/inajeee.v8n1.p25-31.

A. Halim, Z. Djafar, and W. H. Piarah, “Enhancing Solar Power Harvest By Using Absorber Plates on Thermoelectric Generator Modules,” Lect. Notes Mech. Eng., pp. 53–59, 2023, doi: 10.1007/978-981-19-3629-6_6.
Articles pp. 27 - 35

Rancang bangun mesin pencetak briket arang sekam padi dengan sistem screw press

Samhuddin, Waode Nirwana Sari Halidun, Muh. Erdiansyah, Aldi Perdana

doi 10.55679/pistonjt.v11i1.135

Views 0

Abstract PDF
References

Rancang bangun mesin pencetak briket arang sekam padi dengan sistem screw press

Y. Afriyanti, H. Sasana, and G. Jalunggono, “Analisis faktor-faktor yang mempengaruhi konsumsi energi terbarukan di Indonesia,” DINAMIC: Directory Journal of Economic, vol. 2, no. 3, pp. 865–884, 2020, doi: 10.31002/dinamic.v2i3.1428.

L. O. A. Barata, Masharib Al Akhyar, Aminur, Amrullah, and Akbar Naro Parawangsa, “Uji Karakteristik Briket Campuran Serbuk Kayu dan Tandan Kosong Sawit Sebagai Bahan Bakar Alternatif”, Piston-JT, vol. 9, no. 2, pp. 72–79, Dec. 2024.

R. P. Primadanty, “Potensi biomassa dalam transisi energi di Indonesia,” PARAHYANGAN Economic Development Review, vol. 2, no. 2, pp. 136–143, 2023, doi: 10.26593/pedr.v2i2.7707.

I. Listiana, R. Bursan, R. A. D. Widyastuti, A. Rahmat, and H. Jimad, “Pemanfaatan limbah sekam padi dalam pembuatan arang sekam di Pekon Bulurejo, Kecamatan Gadingrejo, Kabupaten Pringsewu,” Intervensi Komunitas, vol. 3, no. 1, pp. 1–5, 2021, doi: 10.32546/ik.v3i1.1118.

N. Yuliza, N. Nazir, and M. Djalal, “Pengaruh komposisi arang sekam padi dan arang kulit biji jarak pagar terhadap mutu briket arang,” Jurnal Litbang Industri, vol. 3, no. 1, pp. 21–30, 2013.

L. Parinduri and T. Parinduri, “Konversi biomassa sebagai sumber energi terbarukan,” JET (Journal of Electrical Technology), vol. 5, no. 2, pp. 88–92, 2020.

J. M. Amin, R. Yuanda, S. B. A., and S. Hidayat, “Pembuatan briket sekam padi (Oryza sativa L.) sebagai bahan bakar alternatif pengganti kayu bakar,” Prosiding Semnas First, vol. 1, no. 2, pp. 53–64, 2023. [Online]. Available: https://jurnal.polsri.ac.id/index.php/semnasfirst/article/view/6104

D. Oktavitasari and M. R. N. Hakim, “Rancang bangun mesin pencetak briket sekam padi menggunakan penggerak motor listrik,” INFOTEX: Jurnal Ilmiah Bidang Ilmu Teknik, vol. 2, no. 1, pp. 251–259, 2023.

Sutrisno, Dini Oktavitasari, dan Muhammad Rachman Nul Hakim. “Rancang Bangun Mesin Pencetak Briket Sekam Padi Menggunakan Pengerak Motor Listrik”. INFOTEX: Jurnal Ilmiah Bidang Ilmu Teknik 2, no. 1 (Oktober 31, 2023): 251–259.

S. Saparin, R. Nurdiansyah, Y. Setiawan, and E. S. Wijianti, “Rancang bangun mesin screw extruder pencetak briket,” Sultra Journal of Mechanical Engineering, vol. 3, no. 2, pp. 102–110, 2024, doi: 10.54297/sjme.v3i2.736.

H. Santosa and Y. Yuliati, “Rancang bangun mesin screw extruder pencetak arang briket,” Rekayasa, vol. 16, no. 2, pp. 250–256, 2023.

T. Hendrawan, “Rancang bangun mesin pencetak briket semi-otomatis,” Doctoral dissertation, Universitas Islam Indonesia, Yogyakarta, Indonesia, 2024.

R. Akbar, D. Wulandari, F. Y. Utama, and A. N. F. Ganda, “Rancang Bangun Mesin Screw Extruder Arang Briket Berbahan Baku Batok Kelapa Semi Otomatis,” Jurnal Rekayasa Mesin, vol. 9, no. 2, 2024.

D. Puspa, M. Yerizam, A. Zamheri, and A. T. Wardhana, “Performance Analysis of Bio-Briquetting Machine with Screw Extruder Type Based on Quality of Bio-Briquettes,” AUSTENIT, vol. 15, no. 2, pp. 109–114, 2023, doi: 10.53893/austenit.v15i2.7218.

M. Tofa, “Perancangan Mesin Pencetak Briket Tempurung Kelapa Dengan Sistem Pendorong Screw Extruder,” Skripsi, Universitas Jember, 2025.

O. S. I. Fayomi et al., “Effects of Critical Extrusion Factors on Quality of High-Density Briquettes Produced from Sawdust Admixture,” Materials Today: Proceedings, vol. 38, pp. 949–957, 2021, doi: 10.1016/j.matpr.2020.05.468.
Articles pp. 36 - 54

Studi numerik aliran melalui struktur persegi dengan model turbulen Large Eddy Simulation (LES)

Mohamad Abdirizal Bahmid, La Ode Ahmad Barata, Budiman Sudia

doi 10.55679/pistonjt.v11i1.137

Views 0

Abstract PDF
References

Studi numerik aliran melalui struktur persegi dengan model turbulen Large Eddy Simulation (LES)

S. Tiwari, M. Swaminathan, S. Santhosh Eashwar, Harender, and D. B. Singh, “Performance enhancement of the photovoltaic system with different cooling methods,” Environ. Sci. Pollut. Res., vol. 29, no. 30, pp. 45107–45130, 2022, doi: 10.1007/s11356-022-20330-x.

J. Liu, B. Yan, Y. Gao, X. Zhang, and Y. Pei, “Study on Characteristics of Aeolian Vibration of Conductor Lines Considering Coupling Between Conductor Motion and Vortex Excitation,” Int. J. Appl. Mech., vol. 17, no. 03, pp. 24–26, Mar. 2025, doi: 10.1142/S1758825125500115.

F. Duan and J. Wang, “Fluid-structure-sound interaction in noise reduction of a circular cylinder with flexible splitter plate,” J. Fluid Mech., vol. 920, no. June, 2021, doi: 10.1017/jfm.2021.403.

Z. Hu, J. Wang, Y. Sun, and K. Lin, “The Suppression of Flow-Induced Vibrations for a Single and Two Tandem-Arrangement Cylinders Using Three Splitter Plates,” J. Mar. Sci. Eng., vol. 12, no. 9, 2024, doi: 10.3390/jmse12091487.

Y. Niu and B. A. Younis, “Computational study and field implementation of methods for the control of vortex shedding from a bridge caisson,” Eng. Appl. Comput. Fluid Mech. , vol. 19, no. 1, 2025, doi: 10.1080/19942060.2025.2504677.

Y. Liu, Y. Li, J. Li, J. Zhou, and X. Qiu, “The wake characteristics and hydrodynamic forces of a near-wall circular cylinder with the splitter plate,” Mod. Phys. Lett. B, vol. 38, no. 33, 2024, doi: 10.1142/S0217984924503160.

W. Oberkampf, “Concepts and Practice of Verificaion, Validation, and Uncertainty Quantification,” 2013. [Online]. Available: papers://f1f22675-95a4-4828-aca2-0d710de1e56f/Paper/p5673

W. L. Oberkampf and M. F. Barone, “Measures of agreement between computation and experiment: Validation metrics,” J. Comput. Phys., vol. 217, no. 1, pp. 5–36, Sep. 2006, doi: 10.1016/j.jcp.2006.03.037.

L. O. A. Barata and S. Samhuddin, “Karakteristik pemanen daya listrik berbasis getaran struktur,” J. Rekayasa Mesin, vol. 13, no. 3, pp. 911–919, Jan. 2023, doi: 10.21776/jrm.v13i3.1268.

F. R. Armin, L. O. A. Barata, and La Hasanudin, “Analisa Numerik Aliran melewati Penampang 2D menggunakan Model Turbulen uRANS,” Enthalpy J. Ilm. Mhs. Tek. Mesin, vol. 10, no. 2, pp. 113–121, 2025, doi: 10.55679/enthalpy.v10i2.3.

La Ode Ahmad Barata, Takahiro Kiwata, Aditya Rachman, Samhuddin, and nanang endriatno, “Numerical Investigation of Flow Around Finite Height Rectangular,” CFD Lett., vol. 15, no. 6, pp. 154–175, Apr. 2023, doi: 10.37934/cfdl.15.6.154175.

T. Kajishima and K. Taira, Computational Fluid Dynamics, no. 9783319762333. Cham: Springer International Publishing, 2017. doi: 10.1007/978-3-319-45304-0.

ANSYS Inc., “Ansys Fluent 18.2 Tutorial Guide,” ANSYS Inc., vol. 15317, no. Agustus, 2017.

S. Mizukami, “Study on the flow around the elastic supported prism and the vibration dynamics of the flow (in Japanese),” Kanazawa University, 2017.

C. W. Knisely, “Strouhal numbers of rectangular cylinders at incidence: A review and new data,” J. Fluids Struct., vol. 4, no. 4, pp. 371–393, Jul. 1990, doi: 10.1016/0889-9746(90)90137-T.

L. O. A. Barata, T. Kiwata, Sudarsono, S. Alfat, N. Endriatno, and R. Wijayanto, “Flow Structure Control over the Square Cylinder with Inclined Splitter Plate: A Pathway to Conserving Energy,” Int. J. Automot. Mech. Eng., vol. 22, no. 4, pp. 12986–13001, Nov. 2025, doi: 10.15282/ijame.22.4.2025.11.0988.

H. Versteeg and W. Malalasekera, Introduction to Computational Fluid Dynamics, 2nd ed. Pearson Education Limited, 2010.

J. Zhou, X. Qiu, J. Li, and Y. Liu, “Effects of a short splitter plate on the wake characteristics and vortex evolution of flow around a circular cylinder in proximity to a wall,” J. Fluid Mech., vol. 1016, August, 2025, doi: 10.1017/jfm.2025.10301.

C. Wang, Q. Wen, S. Zhou, X. Hua, and Z. Huang, “Effects of end condition and aspect ratio on vortex-induced vibration of a 5 : 1 rectangular cylinder,” J. Fluids Struct., vol. 109, no. January, p. 103480, 2022, doi: 10.1016/j.jfluidstructs.2021.103480.
Articles pp. 55 - 60

Rancang Bangun Kompresor Mini Kapasitas 3 kg sebagai Penggerak Air Impact Wrench untuk Aplikasi di Bengkel Otomotif

Aminur, Sudarsono, Budiman Sudia, Raden Rinova Sisworo, Samhuddin

doi 10.55679/pistonjt.v11i1.133

Views 0

Abstract PDF
References

Rancang Bangun Kompresor Mini Kapasitas 3 kg sebagai Penggerak Air Impact Wrench untuk Aplikasi di Bengkel Otomotif

B. Muslim, G. D. Suksmerri, A. Irfan, S. L. Adriyanti and E. Sugriarta, "Hubungan Jumlah Kendaraan Bermotor dengan Kadar Karbon Monoksida (CO) Di Udara Pada Jalan Depan Pasar Bandar Buat Kota Padang," Jurnal Sulolipu: Media Komunikasi Sivitas Akademika dan Masyarakat, vol. 24, no. 2, pp. 290-295, 2024.

A. Rahman and R. Restiatun, "Pengaruh Jumlah Penduduk, Jumlah Kendaraan Bermotor dan Tingkat Pengangguran Terbuka (TPT) Terhadap Pendapatan Asli Daerah di Kalimantan Barat," SEBATIK, vol. 27, no. 2, pp. 699-707, 2023.

P. D. Lestari, N. Fitri, S. Suriyadi, D. C. Sari and S. Safaruddin, "Pengaruh Kualitas Pelayanan dan Promosi terhadap Keputusan Pembelian Mobil Toyota Di Kota Binjai," IJEN: Indonesian Journal of Economy and Education Economy, vol. 2, no. 3, pp. 437-445, 2024.

J. Jumasri, Z. Zulfahri, M. Monice and D. Darmansyah, "Studi Perbandingan Konsumsi Energi Listrik pada Motor Kompresor Air Conditioner Jenis Inverter dan Non-Inverter," SainETIn (Jurnal Sain, Energi, Teknologi & Industri), , vol. 8, no. 2, p. 59 – 68, 2024.

S. Mousavi, S. Kara and B. Kornfeld, "Energy Efficiency of Compressed Air Systems," ScienceDirect Procedia CIRP, vol. 15, no. 1, pp. 313-318, 2014.

N. N. Suryaman and E. R. Noordianto, "Analisa Hasil Uji Kompressor sistem Refrigerasi Menggunakan Inverter," J-ENSISTEC (Journal of Engineering and Sustainable Technology), vol. 10, no. 1, pp. 966-971, 2023.

D. S. Permana and Y. Kusuma, "Analisis Kinerja Sistim Kompresor Udara di Jalur Produksi PT. X Melalui Audit Energi," Jurnal Teknik Mesin, vol. 10, no. 2, pp. 91-99, 2021.

R. Muliawan, M. Ghanim and T. Sutandi, "Komparasi Penerapan Kinerja Inverter pada Sistem Refrigerasi dengan Alat Ekspansi Jenis TXV dan Pipa Kapiler," Jurnal Energi, vol. 10, no. 1, pp. 7-13, 2020.

J. Lasmana and A. Saleh, "Rancangan Bangun Compressor dengan Sistem Otomasi Hybrid," JIKH: Jurnal Ilmiah Kajian Humaniora, vol. 8, no. 8, pp. 11-22, 2024.

Y. K. Sanuki, M. Halil and N. Niharman, "Rancang Bangun Kompresor Udara Menggunakan Kompresor Bekas AC dengan Tekanan 120 Psi," JURITEK: Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, vol. 5, no. 3, pp. 107-122, 2025.

R. D. Saraswati, A. W. Husodo and D. Dermawan, "Perancangan Hand Grip Tahan Getaran Pada Mesin Impact Wrench," in Proceeding 1st Conference on Safety Engineering and Its Application, Surabaya, 2017.
Articles pp. 61 - 69

Optimalisasi Alat Press Hidrolik Untuk Fabrikasi Material Komposit

Nanang Endriatno

doi 10.55679/pistonjt.v11i1.141

Views 0

Abstract PDF
References

Optimalisasi Alat Press Hidrolik Untuk Fabrikasi Material Komposit

N. Endriatno, “Review of Characteristics and Mechanical Properties of Coconut Fiber as Reinforcement in Polymer Matrix Composites,” vol. 01, no. 02, 2024.

P. Studi et al., “Rancang Bangun Mesin Press Hidrolik Bearing Dan Bending,” vol. 10, no. 83, pp. 30–36.

S. Robert and L. Tom, “Effect Of Inlet Pressure And Binder On The Void Content Of Vacuum Infused Unidirectional GFRP,” 2024.

K. Ton, D. I. Bengkel, and R. Motor, “Rancang bangun alat press hidrolik multi fungsi kapasitas 1 ton di bengkel rahmat motor,” J. Media Teknol., vol. 11, no. 01, pp. 1–10, 2024.

Amsal, Afdal, R. Abu, and Mukhnizar, “Perancangan Alat Press Hidrolik Kapasitas 20 Ton,” J. Tek. Ind. Terintegrasi, vol. 7, no. 1, pp. 1–5, 2024.

K. Kristiandi et al., “Pembuatan Alat Hydraulic Hot Press sebagai Teknologi Tepat Guna dalam Pencetakan Totebag dari Lembaran Pelepah Pinang,” vol. 9, no. 2, pp. 258–264, 2025, doi: 10.30588/jeemm.v9i2.2419.

I. Tretiak, L. F. Kawashita, and S. R. Hallett, “Manufacturing composite laminates with controlled void content through process control,” 2024, doi: 10.1177/07316844231154585.

A. Purkuncoro, Eko, Pengenalan computer aided design 2d / 3d Assembly dan Animate menggunakan Autodesk Inventor Professional. Malang: Universitas Wisnuwardhana Malang Press (Unidha Press), 2019.

P. D. Atos, “Perancangan dan Analisis Kekuatan Konstruksi Portable Truck Scale di PT Bukit Asam,” vol. 23, no. 1, pp. 314–320, 2022.

M. Metode, E. Hingga, N. Endriatno, L. Ode, and A. Barata, “Analisis Kekuatan Rangka Mesin Pencacah Nilam dengan,” vol. 9, no. 2, pp. 56–64, 2024.

W. Hilmansyah, D. Puspitasari, and T. Davareza, “Analisis Kekuatan Lifting Lug pada Proses Dismantling Chimney Berbasis Finite Element Analysis,” vol. 10, no. 10, pp. 662–670, 2025.

R. H. Alasfar, S. Ahzi, N. Barth, V. Kochkodan, M. Khraisheh, and M. Koç, “A Review on the Modeling of the Elastic Modulus and Yield Stress of Polymers and Polymer Nanocomposites : Effect of Temperature , Loading Rate and Porosity,” 2022.

A. Aabid, Y. E. Ibrahim, and M. Hrairi, “Optimization of Structural Damage Repair with Single and Double-Sided Composite Patches through the Finite Element Analysis and Taguchi Method,” 2023.
Articles pp. 70 - 81

Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

Afdal Syarif, La Baride, Haryani Haryani, La Atina

doi 10.55679/pistonjt.v11i1.140

Views 0

Abstract PDF
References

Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

M. Victoria et al., “Solar photovoltaics is ready to power a sustainable future,” Joule, vol. 5, no. 5, pp. 1041–1056, doi: 10.1016/j.joule.2021.03.005.

F. Afif, A. Martin, “Tinjauan Potensi dan Kebijakan Energi Surya di Indonesia,” J. Engine Energi, Manufaktur, dan Mater., vol. 6, no. 1, pp. 43–52, 2022.

M. I. M.A.A. Mamun, M. Hasanuzzaman;, and J. Selvaraj, “Effect of tilt angle on the performance and electrical parameters of a PV module : Comparative indoor and outdoor experimental investigation maximum Power Point Tracker,” Energy Built Environ., vol. 3, no. 3, pp. 278–290, 2022, doi: 10.1016/j.enbenv.2021.02.001.

Y. Zhang, J. Qi, Y. Yu, Q. Shi, and Z. Liu, “Influence of incidence angle effects on the performance of bifacial photovoltaic modules considering rear-side reflection,” Sol. Energy, vol. 245, no. oct., pp. 404–409, 2022, doi: 10.1016/j.solener.2022.08.027.

A. Z. Hafez, A. M. Yousef, and N. M. Harag, “Solar tracking systems: Technologies and trackers drive types – A review,” Renew. Sustain. Energy Rev., vol. 91, pp. 754–782, 2018, doi: 10.1016/j.rser.2018.03.094.

L. O. A. Barata, Samhuddin, R. F. Naryanto, M. K. Delimayanti, and L. Baride, “Studi Karakteristik Energi Surya untuk Pemanenan Energi: Studi Awal di Kota Kendari ”, Piston: Jurnal Teknologi, vol. 10, no. 1, pp. 8–18, 2025, doi: 10.55679/pistonjt.v10i1.85

M. Efendi, R. I. Mainil, A. Aziz, U. Riau, and C. Author, “Comparison of the Efficiency of Solar PV Fixed, Single-Axis, and Dual-Axis Solar Trackers: A Review,” J. Konversi Energi dan Manufaktur, vol. 10, no. 1, pp. 84–93, 2025, doi: 10.21009/JKEM.10.1.9.

E. E. Prasetiyo, G. Marausna, R. Rasmi, and D. Rahmiullah, “Analisis Perbandingan Hasil Daya Listrik Panel Surya Dengan dan Tanpa Solar Tracker,” JTT (Jurnal Teknol. Terpadu), vol. 10, no. 2, 2022, doi: 10.32487/jtt.v10i2.1426.

F. D. Putra, H. Radhiati, L. O. A. Barata, and L. K. Mangalla, “Studi Karakteristik PV Panel sebagai Pemanenan Energi Listrik: Efek Solar Tracking”, Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin, vol. 10, no. 1, pp. 1–8, Feb. 2025, doi: 10.55679/enthalpy.v10i1.2.

M. A. Al Sheikh;, “IoT-Enabled Dual-Axis Solar Tracking System Using ESP32 and Blynk for Real-Time Monitoring and Energy Optimization,” Jupiter Publ. Ilmu Keteknikan Ind. Tek. Elektro dan Inform., vol. 3, no. 1, pp. 187–204, 2025, doi: 10.61132/jupiter.v3i1.695.

R. Ramful and N. Sowaruth, “Low-cost solar tracker to maximize the capture of solar energy in tropical countries,” Energy Reports, vol. 8, pp. 295–302, 2022, doi: 10.1016/j.egyr.2022.10.145.

H. Nugroho, M. H. Kemal, F. H. Rumawan, and D. Suprihanto, “Penerapan Solar Tracking System Berlengan Ganda dengan Memanfaatkan Potensi Tenaga Surya,” vol. 8, no. 01, pp. 21–26, 2025, doi: 10.30651/cl.v8i01.23872.

I. S. Osman, I. K. Almadani, N. G. Hariri, and T. S. Maatallah, “Experimental Investigation and Comparison of the Net Energy Yield Using Control-Based Solar Tracking Systems,” Int. J. Renew. Energy Res., vol. 8, no. 4, pp. 1123–1132, 2022, doi: 10.1155/2022/7715214.
Articles pp. 82 - 90

Development of an IoT-Based Heat Index and UV Index Monitoring System Using ESP8266 in Sikka Regency

Isma Alip, Zakaria Al Farizi, Nurfadilah

doi 10.55679/pistonjt.v11i1.139

Views 0

Abstract PDF
References

Development of an IoT-Based Heat Index and UV Index Monitoring System Using ESP8266 in Sikka Regency

D. T. Songo, P. Suryandari, and A. D. Sulistiowati, “Perancangan Hotel Resort di Pantai Sine Tulungagung, Jawa Timur,” Maestro, vol. 5, no. 1, pp. 15–33, 2022.

S. Ristanto, C. Huda, D. Affandi, and F. Kurniawan, “Pengukuran Indeks Ultraviolet Matahari dan Atenuasinya oleh Beberapa Bahan untuk Rekomendasi Waktu Aman Berjemur,” Indonesian Journal of Applied Physics, vol. 11, no. 2, pp. 248–255, 2021.

F. A. Faustine, I. Rahman, R. M. Tasya, A. J. N. Pulungan, and E. Kholinne, “The Importance of Heat Acclimation in Recreational Runners: Benefits, Challenges and Strategies,” Jurnal Akta Trimedika (JAT), vol. 2, no. 2, pp. 754–768, 2025, doi: 10.25105/aktatrimedika.v2i2.22449.

F. S. Arsad et al., “The Impact of Heatwaves on Mortality and Morbidity and the Associated Vulnerability Factors: A Systematic Review,” Int. J. Environ. Res. Public Health, vol. 19, no. 23, 2022, doi: 10.3390/ijerph192316356.

D. J. Vecellio, S. T. Wolf, R. M. Cottle, and W. L. Kenney, “Utility of the Heat Index in defining the upper limits of thermal balance during light physical activity (PSU HEAT Project),” Int. J. Biometeorol., vol. 66, no. 9, pp. 1759–1769, 2022, doi: 10.1007/s00484-022-02316-z.

G. Havenith, J. W. Smallcombe, S. Hodder, O. Jay, and J. Foster, “Comparing the efficacy of different climate indices for prediction of labor loss, body temperatures, and thermal perception in a wide variety of warm and hot climates,” J. Appl. Physiol., vol. 137, no. 2, pp. 312–328, Aug. 2024, doi: 10.1152/japplphysiol.00613.2023.

E. Fitraneti, Y. Rizal, S. Riska Nafiah, I. Primawati, and D. Ayu Hamama, “Pengaruh Paparan Sinar Ultraviolet terhadap Kesehatan Kulit dan Upaya Pencegahannya : Tinjauan Literatur,” Scientific Journal, vol. 3, no. 3, pp. 185–194, May 2024, doi: 10.56260/sciena.v3i3.147.

Muh. N. Fajri, M. Anshari, Antarissubhi, and Suryani, “Rancang Bangun Sistem Monitoring Dan Controlling Pada Pengering Pakaian Berbasis Wemos D1 R1,” Jurnal Teknik Elektro, vol. 14, no. 2, pp. 72–78, 2022.

M. Yampolsky, E. Pikhay, R. Shima Edelstein, and Y. Roizin, “High-Sensitivity CMOS-Integrated Floating Gate-Based UVC Sensors,” Sensors, vol. 23, no. 5, 2023, doi: 10.3390/s23052509.

Md. M. Islam, M. A. Kashem, and J. Uddin, “An internet of things framework for real-time aquatic environment monitoring using an Arduino and sensors,” International Journal of Electrical and Computer Engineering (IJECE), vol. 12, no. 1, pp. 826–833, Feb. 2022, doi: 10.11591/ijece.v12i1.pp826-833.

M. Anitha and L. S. Kumar, “Development of an IoT-Enabled Air Pollution Monitoring and Air Purifier System,” Mapan - Journal of Metrology Society of India, vol. 38, no. 3, pp. 669–688, 2023, doi: 10.1007/s12647-023-00660-y.

V. S. Windyasari and M. A. Candra, “Prototipe Sistem Otomatis Lampu Ultraviolet-B Pada Kandang Burung Dengan Sensor Suhu Berbasis Mikrokontroler Arduino,” Jurnal Algoritma, Logika dan Komputasi, vol. 3, no. 2, pp. 284–290, 2021, doi: 10.30813/j-alu.v3i2.2479.

A. Abusultan, H. Abunahla, Y. Halawani, B. Mohammad, N. Alamoodi, and A. Alazzam, “Artificial Intelligence-Aided Low Cost and Flexible Graphene Oxide-Based Paper Sensor for Ultraviolet and Sunlight Monitoring,” Nanoscale Res. Lett., vol. 17, no. 1, 2022, doi: 10.1186/s11671-022-03727-y.
Articles pp. 91 - 97

Perancangan Sistem Dog Clutch Transmisi Prototipe Diesel Berbasis Analisis FEM dan Pengujian Mekanik Material

Husna Drajat RN, Amirul Siddiq, Prasetyo

doi 10.55679/pistonjt.v11i1.142

Views 0

Abstract PDF
References

Perancangan Sistem Dog Clutch Transmisi Prototipe Diesel Berbasis Analisis FEM dan Pengujian Mekanik Material

H. M. Ardi, M. M. Fahmi, N. Fajri, and Y. A. Wiraputra, “Overhaul dan Uji Performansi Generator Firman,” vol. 12, no. 1, 2026.

D. Setiawan, R. Jatnika, D. M. Muthohhary, I. Azmy, and T. Okviyanto, “Optimasi Performa Mesin Diesel Matsumoto MDX- 178F melalui Modifikasi Intake dan Exhaust,” vol. 12, no. 1, 2026.

S. R. Asep Sukmayadi, “Pedoman Kontes Mobil Hemat Energi (KMHE) Perguruan Tinggi 2024,” 2024.

F. M. Huda, S. Anis, M. B. Laroybafih, and D. F. Fitriyana, “Rancang Bangun Dog Clutch Transmission System Pada Kendaraan Mobil Hemat Energi Urate Evo-7 Pandawa Team,” vol. 10, no. 2, pp. 51–56, 2025, doi: http://dx.doi.org/10.55679/enthalpy.v9i4.

H. M. Ardi, M. M. Fahmi, D. Setiawan, and M. Y. Efendi, “Perencanaan Transmisi Mekanik Roda Gigi dan Generator Turbin Vorteks PLTMH,” J. Tek. Mesin, vol. 20, no. 2, pp. 55–63, 2023, doi: 10.9744/jtm.20.2.55-63.

H. Widiantoro, D. Eka, S. Arifin, D. Setiawan, and A. P. I. P, “Analisis Kekuatan Fishing Tools Holder 50 . 000 LBS Menggunakan Metode Finite Element,” J. Crankshaft, vol. 6, no. 3, pp. 68–79, 2023, doi: https://doi.org/10.24176/crankshaft.v6i3.11557.

S. Pradhan, B. Biswal, G. A. Sharma, A. Nayak, and H. R. Behera, “Finite Element Analysis of Dog Clutch Plate Using Numerical Methods,” vol. 8, no. 8, pp. 612–622, 2021, doi: 10.17148/IARJSET.2021.88101.

G. Pahl, W. Beitz, J. Feldhusen, and K.-H. Grote, Engineering Design: A Systematic Approach, 3rd ed. London: Springer London, 2007. doi: 10.1007/978-1-84628-319-2.

R. E. Firdausah, N. Ilminnafik, and M. Asrofi, “Performance of a Single Cylinder Diesel Engine Fueled by 40 % Biodiesel Blend with Excess Air System,” 2025, doi: 10.31284/j.jmesi.2025.v5i1.6917.

W. D. C. Jr. and David G. Rethwisch, Materials Science and Engineering: An Introduction, 10th ed. Wiley, 2018.

S. Y. Purwanto, Elemen Mesin. Yogyakarta: Akprind Press, 2018.

R. C. Hibbeler, Mechanics of Materials, 10th ed. Pearson, 2016.

Y. Aktir, Jean-François Brunel, Philippe Dufrenoy, and Hervé Mahé, “Three-dimensional finite element model of an automotive clutch for analysis of axial vibrations,” Proc. Inst. Mech. Eng. Part D J. Automob. Eng., vol. 230, no. 10, pp. 1324–1337, 2016, doi: 10.1177/0954407015607377.

C. Duan, “Analytical Study of a Dog Clutch in Automatic Transmission Application,” SAE Int. J. Passeng. Cars – Mech. Syst., vol. 7, no. 3, pp. 1155–1162, 2014, doi: 10.4271/2014-01-1775.

PISTON: Jurnal Teknologi

Rancang Bangun Mesin Pemotong Rumput Berbasis Sistem Kontrol

Pengujian Mekanik (Kekerasan dan Impact) Logam Ferro Valve Plat Double Dampers yang Digunakan Sebagai Penyaring Abu Boiler

Studi eksperimen prestasi termoelektrik sebagai pemanen energi listrik mikro: efek gradien temperatur dan konfigurasi modul

Rancang bangun mesin pencetak briket arang sekam padi dengan sistem screw press

Studi numerik aliran melalui struktur persegi dengan model turbulen Large Eddy Simulation (LES)

Rancang Bangun Kompresor Mini Kapasitas 3 kg sebagai Penggerak Air Impact Wrench untuk Aplikasi di Bengkel Otomotif

Optimalisasi Alat Press Hidrolik Untuk Fabrikasi Material Komposit

Evaluation of Net Energy Gain Solar Tracker Single-Axis based on Relay of 50 Wp Solar Panel

Development of an IoT-Based Heat Index and UV Index Monitoring System Using ESP8266 in Sikka Regency

Perancangan Sistem Dog Clutch Transmisi Prototipe Diesel Berbasis Analisis FEM dan Pengujian Mekanik Material

Announcements

CALL FOR PAPER

Analisa Keselamatan dan Kesehatan Kerja Pada Pengoperasian Forklift di PT.Equiport Inti Indonesia

Dispenser Otomatis Berbasis Arduino Uno

Perancangan Pembuatan Kapal Tenaga Surya Skala Miniatur

Perawatan dan Perbaikan Alat Reach Stacker (RS) PT. Pelabuhan Indonesia IV (PERSERO) Cabang Kendari

Sistem Pendingin Pada Induced Draft Counter flow Cooling Tower

citation analysis

Language

Main Menu

template

Make a Submission

TOOLS

ABSTRACTING AND INDEXING

visitors

bkstm

Keywords

ISSN

Principal Contact

Support Contact